Eye Witness WC frames

[ecymosis]

Has anybody seen or heard of these frames? This client wants me to replace the lenses in this frame. The eyewire screw looks like a torx screw. I have the smallest possible torx driver and that is too big. I thought these frames were manufactured by Thelios. I called them, they don't. They are Belgium frames. Please somebody point me in a direction. I hate to lose this sale, due to a tiny little screw.

[Kwill212]

Theo not Thelios. But I don't know what size torx you need. Sounds like a trip to the hardware store is needed. FWIW Etnia Barcelona uses a T-4.

[ODoS_HBB]

It's a T3 torx screwdriver, either a hardware or electronic store should have one. Also, incase you didn't already figure it out, Theo's Eye Witness typically have asymmetrical lens shapes left to right.

[ecymosis]

It's a T3 torx screwdriver, either a hardware or electronic store should have one. Also, incase you didn't already figure it out, Theo's Eye Witness typically have asymmetrical lens shapes left to right.

I ordered one from Amazon. Wish me luck.
Sincerely
Thank you

[Jinonisie]

Just saw your post about ordering a T3 torx screwdriver for your Eye Witness frames. Smart move! Those specific screwdrivers can be a lifesaver for handling delicate eyewear adjustments. Once you get your hands on it, you'll find it makes a huge difference, especially with those asymmetrical lens shapes Theo's known for.

[ecymosis]

I can't convey my thank you enough.
1 less thing that I do not need to be concerned about.