Difficult screws

[Lensman11]

Fortunately for me I am retired and don’t have to deal with the day to day problems that come up in an optical lab. One of the most frustrating was not being able to remove a screw that had a stripped head or just corroded in place. I recently came across a product the works extremely well solving this problem with non optical screws thought it might just as well with the optical screws. It works instantly causes no damage is inexpensive and increases the tork of a screw driver x 7. If someone will try it out add to the post for everyone’s advantage.

Mfg DAP
NAME. TANK BOND LIQUID GRIP

AVAILABLE. MOST HARDWARE STORES

[Plausible]

Fortunately for me I am retired and don’t have to deal with the day to day problems that come up in an optical lab. One of the most frustrating was not being able to remove a screw that had a stripped head or just corroded in place. I recently came across a product the works extremely well solving this problem with non optical screws thought it might just as well with the optical screws. It works instantly causes no damage is inexpensive and increases the tork of a screw driver x 7. If someone will try it out add to the post for everyone’s advantage.

Mfg DAP
NAME. TANK BOND LIQUID GRIP

AVAILABLE. MOST HARDWARE STORES

Wait?!?!?! Retired, lives in California and was in Optical? You Sir are my hero and must have made a mint$$$$$
Just kidding!!!! Thanks for the tip, I will check out the tank bond!!!!!