Hi All,
Just curious as to why some PAL Designs will keep increasing in ADD once you've reached past the NRP ordered Add.
For example: Order and Lab Paperwork will both have +2.25 Add. But once you measure past the NRP it will keep increasing in increments of 0.25 and sometimes you'll get +2.75 about 4mm or so past the NRP

Then other designs (Mainly Zeiss Smarlife Progressives i've noticed). Will effectively "Lock in" The Add Power mostly.
It won't increase further past the NRP and remain pretty constant overall.

Is that just an intended feature of different designs?

It sometimes presents a challenge, because if a PX had been wearing one of those lenses that have constantly increasing progression at the bottom. They will in effect have gotten extra Near Power. Even though the laser marking will say: +2.25

They will then miss that extra bump when using a design that locks in the add.

Does anyone else notice this amongst different PAL designs?

Thanks.