I ask to you friends.

I have to replace a polarized cr39 backside AR filters for a prada frame, the originals are not avaible.

My lab return the frame today, they mounted Zeiss Polar filter.

They seems ok... but the 180 line (Z engraving for polarized axis) it is a little off... I think 2° tolerance... Also both filters have 2° off but NOT in the same way they are rotate both to the nasal side.

also in front of an LCD Monitor for test, they have a cross effect, it seems they are cut ok, not too big

In is in tolerance for you? Or I return back to the lab? I link photos

This is the engraving https://www.dropbox.com/s/bhw9ars1bh4iblp/en.jpeg?dl=0 AND https://www.dropbox.com/s/lml5ugsg7cot1ld/en2.jpeg?dl=0


This is Zeiss cross effect in front of lcd https://www.dropbox.com/s/ejteh5wx9s...eiss.jpeg?dl=0
This is the ORIGINAL old filter in front of lcd https://www.dropbox.com/s/e1ndtmc9ss...inal.jpeg?dl=0