Beware of Art Craft! I've sold a couple and the quality you will see is really lacking. Adjusting the pads can also be challenging. The soldering is bad and the pad arm can break much more easily than it should. (The 3rd front I ordered was a charm.)
Be prepared for green to appear on the temples after a year and the cable to break with out great care bending it when putting them on or off.
I've converting a few dozen pairs with Hilco's conversion kit. Try to use a frame with the same round core. I do not glue them and as long as I can get the cable tip about 6 or 8mm in they will not come out and allow greater flexibility for the patient putting them on and taking them off.
Safilo frames tend to fit these well. I mark the standard temple with a sharpie on the forward part of the ear. It tends to be a lot closer to the front than you would feel comfortable trimming but this is what works for me. No glue and you can error on the long side and adjust shorter accordingly.
Watch the video.
Bookmarks