Results 1 to 3 of 3

Thread: 4T Tracer/ 7EX Edger/ Innovations Help

  1. #1
    OptiBoard Novice
    Join Date
    Jan 2019
    Location
    Wichita
    Occupation
    Lens Manufacturer
    Posts
    3

    4T Tracer/ 7EX Edger/ Innovations Help

    I have an puzzle here that needs solving


    LMS Innovations @ Lab (Standalone - No Internet)

    Edger 7EX connects directly to Innovations

    4T Tracer @ Lab also connects to innovations


    I have 4T Tracer at a remote location connected to a computer with VisionWeb Tracer Software.


    What happens here is the 4T @ Remote Location traces the frames and pumps out an OMA file.

    A courier copies the traced files onto a flash drive daily, and brings it to my Lab.

    At the lab, i drag and crop OMA files into Innovations "Ticket" Folder, where the other traces are stored when I trace from my lab.

    The issue is that I cannot seem to get Innovations to read the OMA files being produced by the remote locatons.

    I noticed inside the "Tickets" Folder for innovations, everything is save as an XML format.

    My goal is to either convert OMA to the needed XML format. OR, get innovations to read OMA.

    Please help!

  2. #2
    Handy With a Spoon brucekrymow's Avatar
    Join Date
    Aug 2004
    Location
    Phoenix, AZ USA
    Occupation
    Other Optical Manufacturer or Vendor
    Posts
    109
    What you have described, sir, sounds very user unfriendly, is a huge time waster, and creates too many opportunities for errors, which the lab always ends up eating.

    We have available a super solution whereby the 4T tracer at the Remote Location simply traces the frame, enters the patient name and some of the Rx, and presses "Send" => Done!

    At the lab, the Rx and the traced frame shape magically appears in seconds after being sent over the internet, then you block and edge the job => Done!

    What you have described above is much to manual, complicated, messy, and takes about 10 times longer.

    Please PM or email me so I can provide more details, and then have you try this simple, fast, and easy solution for free.


    Optivision, Inc.
    LMS Lab Software
    Remote Tracing/Edging

    602.277.2614 x2

    www.optivision.com
    www.digitaltrace.net
    bruce@optivision.com

  3. #3
    Handy With a Spoon brucekrymow's Avatar
    Join Date
    Aug 2004
    Location
    Phoenix, AZ USA
    Occupation
    Other Optical Manufacturer or Vendor
    Posts
    109
    Received your message!

    Emailing all of the details to you now


    Optivision, Inc.
    LMS Lab Software
    Remote Tracing/Edging

    602.277.2614 x2

    www.optivision.com
    www.digitaltrace.net
    bruce@optivision.com

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. software tracer edger help
    By chamilun in forum General Optics and Eyecare Discussion Forum
    Replies: 12
    Last Post: 12-10-2010, 10:51 PM
  2. edger/tracer question
    By Refractingoptician.com in forum General Optics and Eyecare Discussion Forum
    Replies: 6
    Last Post: 04-09-2007, 10:14 PM
  3. Innovations Lab Software WECO Tracer
    By poweredbuyer in forum General Optics and Eyecare Discussion Forum
    Replies: 1
    Last Post: 04-03-2006, 12:54 PM
  4. Way to communicate between PC and tracer and edger
    By tamagotchi in forum General Optics and Eyecare Discussion Forum
    Replies: 16
    Last Post: 08-26-2005, 07:06 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
OptiBoard is proudly sponsored by:
Younger Optics and Vision Equipment