Results 1 to 6 of 6

Thread: A/R Lab Recommendations

  1. #1
    OptiBoard Apprentice
    Join Date
    Sep 2002
    Location
    Marietta, GA. 30066
    Occupation
    Dispensing Optician
    Posts
    44

    A/R Lab Recommendations

    Looking for some advice on an outside Lab that can apply Blue Block and Standard A/R coatings after I surface in-house and hard coat.

    Thank you for any direction you may provide.

    JB

  2. #2
    Master OptiBoarder OptiBoard Silver Supporter
    Join Date
    Jul 2008
    Location
    Cincinnati
    Occupation
    Other Optical Manufacturer or Vendor
    Posts
    637
    Quote Originally Posted by MadEyeMan View Post
    Looking for some advice on an outside Lab that can apply Blue Block and Standard A/R coatings after I surface in-house and hard coat.

    Thank you for any direction you may provide.


    JB
    We sell SF blanks with Blue block built in and front side AR. If of interest don@superoptical.com

  3. #3
    OptiBoard Apprentice
    Join Date
    Sep 2002
    Location
    Marietta, GA. 30066
    Occupation
    Dispensing Optician
    Posts
    44
    Email sent !

  4. #4
    Master OptiBoarder
    Join Date
    Feb 2016
    Location
    usa
    Occupation
    Dispensing Optician
    Posts
    989
    Seiko custom coating lab in Hopkins MN will coat just about anything. They are really fast, and really good. I have some direct extension numbers, but to open an account you probably have to go through the Hoya/Seiko customer service. 1-800-367-4692. #1,#2,#4 though the menus to get to the custom coating department I think.

    I don't know if they have a "blue block" coating but they probably do.

  5. #5
    OptiWizard OptiBoard Silver Supporter peyes's Avatar
    Join Date
    May 2000
    Location
    Saraland, Alabama
    Occupation
    Optical Retail
    Posts
    377
    Quote Originally Posted by MadEyeMan View Post
    Looking for some advice on an outside Lab that can apply Blue Block and Standard A/R coatings after I surface in-house and hard coat.

    Thank you for any direction you may provide.

    JB
    Robertson Optical in Columbia, SC would be a good fit for you. Call them at (800) 922-5525 and ask for Chuck. Mention that Phil from Alabama recommended them and you would like to have the same pricing I have.

  6. #6
    OptiBoard Apprentice OptiBoard Gold Supporter
    Join Date
    Jan 2018
    Location
    Ashland, OR
    Occupation
    Other Optical Manufacturer or Vendor
    Posts
    18
    Quote Originally Posted by MadEyeMan View Post
    Looking for some advice on an outside Lab that can apply Blue Block and Standard A/R coatings after I surface in-house and hard coat.

    Thank you for any direction you may provide.

    JB
    Anti-Reflection Inc. in Lithia Springs, GA is an independent AR and mirror coating lab.....almost in your back yard.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Recommendations for Optometrist/Lab in SLC, UT Area
    By mbiker in forum General Optics and Eyecare Discussion Forum
    Replies: 8
    Last Post: 08-08-2017, 02:21 PM
  2. lab recommendations?
    By kaypaula in forum General Optics and Eyecare Discussion Forum
    Replies: 0
    Last Post: 07-19-2017, 01:11 PM
  3. I need you lab recommendations please!
    By kpshann in forum General Optics and Eyecare Discussion Forum
    Replies: 9
    Last Post: 01-27-2015, 02:48 PM
  4. Lab recommendations.
    By dave.fant.lab in forum General Optics and Eyecare Discussion Forum
    Replies: 1
    Last Post: 01-23-2013, 06:22 PM
  5. Recommendations
    By edKENdance in forum General Optics and Eyecare Discussion Forum
    Replies: 3
    Last Post: 09-15-2011, 03:51 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •