heard a loud "thump" during edging, then some rather noisy vibration during the edging cycle. Inspection found that the polishing wheel had shed a portion of its surface. Anyone replaced a Santinelli wheel? Can I do it myself?
heard a loud "thump" during edging, then some rather noisy vibration during the edging cycle. Inspection found that the polishing wheel had shed a portion of its surface. Anyone replaced a Santinelli wheel? Can I do it myself?
Talked with Leo Hadley, and he gave me some guidance for removing the wheels, which have seized up and are stuck on the shaft. After some PB Blaster, time, and a torch, I was able to free up the roughing wheel and the beveling wheel, but the polishing wheel will so far not come off. Anyone had this problem? Any suggestions or creative ways to get that baby to spin and come off?
Might need the judicial use of a gear puller. Be careful. You might need a mechanic.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks