Results 1 to 2 of 2

Thread: Brio Scanform Edger HELP

  1. #1
    OptiBoard Apprentice Miss Peepers's Avatar
    Join Date
    Oct 2009
    Location
    Philadelphia
    Occupation
    Dispensing Optician
    Posts
    19

    Brio Scanform Edger HELP

    I call her 'Bessie', she is a wonderful ol' gal, with about 48k lenses on her. She can be temperamental, like this week for instance...
    Edging any lens type, this is what happens;
    Clamp locks, arm goes down, water does not start- tubes are full and clear, lens hits wheel dry, I curse, lift the arm and start to spin the lens manually, it starts to spin on it's own, water starts, it goes almost a full rotation, and stops.
    Rinse, wash, repeat several dozen times.
    The tracer will send a new trace to the edger and the edger accepts it, but the process is the same. I've unplugged it, I've cleaned it thoroughly. I'm thinking maybe the pump? The pump I have now is 25w and it is about 5 yrs old, I ordered a 30w pump and will try that this weekend, BUT, any thoughts on if that isn't it??
    Thank-you so much in advance!!
    Last edited by Miss Peepers; 01-10-2020 at 01:52 PM.
    Have a great day!

  2. #2
    Master OptiBoarder OptiBoard Silver Supporter
    Join Date
    Jul 2008
    Location
    Cincinnati
    Occupation
    Other Optical Manufacturer or Vendor
    Posts
    569
    Could be the water solenoid sticking but they usually stick in the open position

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. EDGER - Brio Acura SX Pattern-less for Sale
    By Alexander2020 in forum Optical Marketplace
    Replies: 1
    Last Post: 08-13-2014, 01:58 PM
  2. Briot 5000s scanform edger
    By DUANE6027 in forum Feedback, Comments and Help
    Replies: 2
    Last Post: 07-07-2014, 02:58 PM
  3. Edger Manual for Briot Scanform Accura
    By senoptic in forum General Optics and Eyecare Discussion Forum
    Replies: 5
    Last Post: 02-22-2008, 01:04 PM
  4. BRIOT SCANFORM PATTERNLESS EDGER
    By I Ludwin in forum Optical Marketplace
    Replies: 6
    Last Post: 07-09-2006, 02:42 PM
  5. Briot 5000 S scanform edger
    By txeyedoc in forum Optical Marketplace
    Replies: 0
    Last Post: 04-03-2003, 05:16 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
OptiBoard is proudly sponsored by:
Younger Optics and Vision Equipment