Results 1 to 2 of 2

Thread: Brought old Briot 4000 lens edger. Need Help!!

  1. #1
    OptiBoard Novice
    Join Date
    Aug 2019
    Location
    cork, ireland
    Occupation
    Optometrist
    Posts
    1

    Brought old Briot 4000 lens edger. Need Help!!

    I brought an old briot 4000 edging machine.
    I drove 18 hours over two days to collect it and can't get it functioning properly so if anyone could help me i'd really appreciate it!

    I have attached a youtube video link of my attempt
    https://www.youtube.com/watch?v=ApkgLlCvmoA

    The lens doesn't rotate and just comes down on the roughing wheel which just carves the shape if the wheel on the bottom
    of the lens.

    Any suggestions would be greatly appreciated.

    Thanks in advance.

  2. #2
    OptiBoard Apprentice
    Join Date
    Dec 2006
    Location
    Denver, CO
    Occupation
    Optical Wholesale Lab (other positions)
    Posts
    16
    It looks like you have the rotational switch turned off. This switch is on the machine to stop rotation at any point of the lens to check bevel placement etc. It is marked with a round circle of sorts (varied with different models). Also it looks like no water is running so either it has not been hooked up yet or the valve on the right side of the machine is turned off. You would be best to experiment with no lens chucked while playing around with the settings.

    Here is a link to a sight that has the manual although it looks like you may have to pay a charge to download it:

    https://www.scribd.com/document/3517...Manual-Fc00234


    Hope this helps. These machines are very durable but it's been 25 years since I've run one and my memory of it has faded a bit.
    Good luck!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Buying a brand new Briot Lens Edger? * STOP* **LOOK HERE FIRST**
    By Leo Hadley Jr in forum Optical Marketplace
    Replies: 7
    Last Post: 09-23-2014, 10:25 AM
  2. Briot U 4000 Pattern Edger
    By jdant57 in forum Optical Marketplace
    Replies: 6
    Last Post: 11-18-2011, 11:19 PM
  3. Briot 4000 problem
    By jefe in forum General Optics and Eyecare Discussion Forum
    Replies: 3
    Last Post: 09-29-2010, 05:42 PM
  4. Help with a briot 4000
    By alcart in forum General Optics and Eyecare Discussion Forum
    Replies: 8
    Last Post: 05-29-2009, 06:02 AM
  5. NEED INFO ON BRIOT N-4000
    By LENNY in forum General Optics and Eyecare Discussion Forum
    Replies: 1
    Last Post: 09-23-2000, 12:52 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
OptiBoard is proudly sponsored by:
Younger Optics and Vision Equipment