Hi, I'm trying to connect my tracer+edger to transmit shapes to my lens provider; I get to the point to have data received on my PC but trasmission never result in a shape, althought the app say the for is correctly received and trasnmitted, here is some sample data:

Code:
DO=B
ANS=TRC
JOB=METAL:0002869
DATA_TYPE=19
FTYPE=3
P_FPD=6916
LAYOUT=17.928;0;5.000;5.000;25.000;0;0
P_R_CIR=146301
P_R_3D_ANGLE=0
P_R_FC=5684
R_LOPT=30.200;0.000
R_EOPT=1;0;1;0;0;1;1;1.200;0.000;0.400;0.600
P_L_CIR=146272
P_L_3D_ANGLE=0
P_L_FC=5630
L_LOPT=30.200;0.000
L_EOPT=1;0;1;0;0;1;1;1.200;0.000;0.400;0.600
TRCFMT=5;1440;U;R;F
TRCFMT=5;1440;U;R;F
CRC=26173