Results 1 to 15 of 15

Thread: Broken screw stuck in frame

  1. #1
    OptiBoard Professional
    Join Date
    May 2005
    Location
    New Hampshire
    Occupation
    Optical Retail
    Posts
    112

    Broken screw stuck in frame

    How would I remove a screw that's stuck in a frame? There is not "leading edge" for me to grab and turn. Thanks.

  2. #2
    Master OptiBoarder
    Join Date
    Feb 2016
    Location
    usa
    Occupation
    Dispensing Optician
    Posts
    989
    Depends on a couple things. If there is room you could use a slotting file to make enough of a groove for a screwdriver to grip. Hilco makes a screw remover tool. Or you can take the daring route, grab your Dremel and drill it out. The last two options will obviously need to be tapped to a larger screw size.

  3. #3
    Master OptiBoarder
    Join Date
    Jun 2000
    Location
    California
    Occupation
    Dispensing Optician
    Posts
    2,816
    that Bullseye works often but not always, hilco also has screw extractors that work sometimes. Drilling works also.

  4. #4
    Master OptiBoarder OptiBoard Silver Supporter lensmanmd's Avatar
    Join Date
    Oct 2016
    Location
    Maryland
    Occupation
    Optical Wholesale Lab (other positions)
    Posts
    1,198
    Western Optical has a great tool for this. A bit pricey, but works really well. The Shootout. A must have for your toolkit. https://westernoptical.com/search?q=shootout

  5. #5
    Master OptiBoarder rbaker's Avatar
    Join Date
    May 2000
    Location
    Gold Hill, OR
    Occupation
    Other Optical Manufacturer or Vendor
    Posts
    4,401
    Sort of unrelated but I sure missed the old brass screws that were replaced with stainless steel in the late sixties. As they were much softer than the nickel used in today's hinges they were easily removed by drilling or punching. Hardly ever damaged the hinge. You could also peen them over to prevent their loosening. You might be able to get some brass screws and nuts today.

  6. #6
    Master OptiBoarder CCGREEN's Avatar
    Join Date
    Jul 2004
    Location
    Emerald Coast of Florida
    Occupation
    Dispensing Optician
    Posts
    967
    Not only using the right tool like a screw extractor helps but use it properly. Do not place it on the broken screw and twist like hell.
    Heat the frame up quit a bit in the bead pan or blower, get a good firm downward pressure on the broken screw and twist right and left about a 1/4 to a 1/3 turn at a time. At least that is the technique that has worked well for me.

  7. #7
    OptiBoardaholic IIxIPariahIxII's Avatar
    Join Date
    Dec 2010
    Location
    Raleigh, North Carolina
    Occupation
    Dispensing Optician
    Posts
    219
    Also, heat up the barrel with a frame warmer before hand. The heat will help work the screw out a bit easier. Doesn't need to be super hot

  8. #8
    OptiBoard Novice
    Join Date
    Dec 2006
    Location
    santa fe
    Occupation
    Other Optical Manufacturer or Vendor
    Posts
    4
    Western Optical Supply has a terrific screw loosening fluid #4110 that they developed for watch repair technicians that works great on hinge screws. Go to www.westernoptical.com to check it out.

  9. #9
    Master OptiBoarder
    Join Date
    Feb 2013
    Location
    PA
    Occupation
    Dispensing Optician
    Posts
    1,607
    Quote Originally Posted by IIxIPariahIxII View Post
    Also, heat up the barrel with a frame warmer before hand. The heat will help work the screw out a bit easier. Doesn't need to be super hot
    +1

  10. #10
    OptiBoard Professional OptiBoard Silver Supporter
    Join Date
    Sep 2000
    Location
    waterford,WI
    Occupation
    Optical Wholesale Lab (other positions)
    Posts
    130
    The Hilco Hot Fingers always works if you have one

  11. #11
    OptiBoard Apprentice OptiBoard Bronze Supporter
    Join Date
    Aug 2016
    Location
    Connecticut
    Occupation
    Optical Retail
    Posts
    12
    If you're going the route of something like the Shootout, we've had some success just taking a hammer and another screw (or similar narrow metal, like a small nail or durable bit of paperclip) and trying to knock it out. Definitely a last resort if a screw extractor isn't working, and it's better as a two-person job, but it may do the trick if all else fails. Keep in mind that you'll mangle the threads in the process, so you'll either need something like a self-tapping screw to replace it or use a hex nut if it's a real emergency fix.

  12. #12
    OptiBoard Novice
    Join Date
    Dec 2006
    Location
    santa fe
    Occupation
    Other Optical Manufacturer or Vendor
    Posts
    4
    You bring up a good point about stripping out the threads in the barrel. Instead of messing with an oversized screw to cut new threads or using a screw and nut there is an additional feature on Western Optical's Shootout tool. You can buy QuickFix Rivets to replace a screw quickly and inexpensively. There are demonstration videos at www.westernoptical.com under product #2042.

  13. #13
    Master OptiBoarder
    Join Date
    Jun 2000
    Location
    California
    Occupation
    Dispensing Optician
    Posts
    2,816
    Quote Originally Posted by Toasty View Post
    If you're going the route of something like the Shootout, we've had some success just taking a hammer and another screw (or similar narrow metal, like a small nail or durable bit of paperclip) and trying to knock it out. Definitely a last resort if a screw extractor isn't working, and it's better as a two-person job, but it may do the trick if all else fails. Keep in mind that you'll mangle the threads in the process, so you'll either need something like a self-tapping screw to replace it or use a hex nut if it's a real emergency fix.
    Hey Toasty, how do you decide who gets to hold the screw and who gets to hammer?

  14. #14
    Master OptiBoarder OptiBoard Silver Supporter lensmanmd's Avatar
    Join Date
    Oct 2016
    Location
    Maryland
    Occupation
    Optical Wholesale Lab (other positions)
    Posts
    1,198
    Quote Originally Posted by CME4SPECS View Post
    Hey Toasty, how do you decide who gets to hold the screw and who gets to hammer?

  15. #15
    Master OptiBoarder
    Join Date
    Feb 2016
    Location
    usa
    Occupation
    Dispensing Optician
    Posts
    989
    Quote Originally Posted by freilich View Post
    You bring up a good point about stripping out the threads in the barrel. Instead of messing with an oversized screw to cut new threads or using a screw and nut there is an additional feature on Western Optical's Shootout tool. You can buy QuickFix Rivets to replace a screw quickly and inexpensively. There are demonstration videos at www.westernoptical.com under product #2042.
    Do you happen to work for Western Optical?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. HELP! Need Frame(s) With Broken Spring Hinge
    By John@OWDC in forum General Optics and Eyecare Discussion Forum
    Replies: 3
    Last Post: 10-03-2018, 11:38 AM
  2. Broken Horn Frame Help
    By DarthDonald in forum General Optics and Eyecare Discussion Forum
    Replies: 8
    Last Post: 09-26-2018, 01:40 PM
  3. With what to fuse a broken frame...............................
    By Chris Ryser in forum Optical Marketplace
    Replies: 3
    Last Post: 10-10-2012, 05:56 AM
  4. Broken trial frame.
    By EdgeOptical in forum General Optics and Eyecare Discussion Forum
    Replies: 11
    Last Post: 04-08-2010, 10:30 AM
  5. extracting a broken screw...
    By volente in forum General Optics and Eyecare Discussion Forum
    Replies: 6
    Last Post: 07-08-2007, 09:54 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •