Results 1 to 2 of 2

Thread: Cloudy Like Defect Appearance on Uncoat Substrate

  1. #1
    OptiBoard Novice
    Join Date
    Oct 2018
    Lens Manufacturer

    Cloudy Like Defect Appearance on Uncoat Substrate


    I am from lens manufacturing industry. Recently our production is encountering a cloudy like defect on lens edge.

    We have evaluated different things to find root cause.

    First assumption: Adhesive quality(being used for casting process) has deteriorated causing said cloudy defect
    1.Proven to be not the issue, tested different tape types and still we are encountering the same issue

    Second assumption: Catalyst quality slowing the reaction rate causing adhesive melting(which causes cloudy like defect)> one of the 4M Changes noticed
    2. Change of Catalyst Lot: Still encountered high occurence of cloudy like defect

    Third Assumption: Dry air being used isn't completely dry causing moisture contamination on mixed monomer solution
    3. Installation of additional filter: lowered the said defect but still encountering

    Fourth: Inner Releaser Issue
    4. We have tried using another batch of similar inner releaser, it was proven to be effective lowered said defect to almost 50% but not said defect is rising again.

    Do you have any idea of this particular defect mechanism? We have tried a lot of things but nothing seem to take effect to actually work. Hoping to get some sort of help from our experts.

    Thank you!

  2. #2
    Manuf. Lens Surface Treatments OptiBoard Gold Supporter
    Join Date
    Aug 2002
    Dorval, a suburb of Montreal in a park like environment on Lake St.Louis.
    Other Optical Manufacturer or Vendor
    Did you checked the molds around the edges, there might be some solvent leftovers.
    Chris Ryser

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Handy Year End Store Appearance Checklist
    By John@OWDC in forum General Optics and Eyecare Discussion Forum
    Replies: 3
    Last Post: 12-14-2017, 12:35 PM
  2. Getting the most pleasing appearance
    By oxmoon in forum Progressive Lens Discussion Forum
    Replies: 11
    Last Post: 12-13-2010, 02:41 PM
  3. No AR; cloudy vision?
    By Happylady in forum General Optics and Eyecare Discussion Forum
    Replies: 7
    Last Post: 10-18-2005, 04:44 PM
  4. Cloudy polycarbonate, anyone?
    By stargazer in forum General Optics and Eyecare Discussion Forum
    Replies: 10
    Last Post: 10-13-2004, 07:36 AM

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
OptiBoard is proudly sponsored by:
BC College of Optics, Younger Optics and Vision Equipment