Results 1 to 4 of 4

Thread: Brand New National Optronics 7EX Edger

  1. #1
    OptiBoard Novice OptiBoard Silver Supporter
    Join Date
    May 2018
    Location
    Melbourne, Fl
    Occupation
    Dispensing Optician
    Posts
    3

    Brand New National Optronics 7EX Edger

    SOLD!!!


    Brand New


    National Optronics 7EX patternless Edger with factory warranty through 11/2018.

    Edger delivered and factory installed late 2017.

    Edger has only 225 total cuts.

    Warranty and phone support with Satisloh USA included.

    https://vimeo.com/266374769


    Features:

    -225 total cut count, mainly calibration.

    -Features a user friendly interface any technician can learn in a couple hours.

    -Help screens available throughout the operation and maintenance functions for ease of use with inexperienced operators.

    -Features an adjustable 15" LCD.

    -Unique dry cutting and three-axis control allows the operator to process CR-39, Polycarbonate, Hi-Index and Trivex lens materials with speed and accuracy.

    -With a blade cutter rather than a grinding wheel, the bevels come out unrounded leading to tighter fitment into the groove of the frame.

    -Electric chucking allows for variable chuck pressures based on materials and coatings leading to less spoilage.

    -OMA compatible and accepts barcode job entry (not included).

    -This Edger cannot process glass lenses.


    Specifications:

    -Height: 28.4" (72cm)

    -Width: 25.3" (64.3cm)

    -Depth: 26.6" (67.5cm)

    -Weight: 143LBS (65.2Kg)

    -Input: 115VAC 60Hz, 1500Watts

    230VAC 50Hz, 1500Watts


    Ranges:

    -Maximum Lens Size: 100mm

    -Minimum Finished "B" Size: 18mm Rimless


    All equipment includes:

    -7EX Edger

    -7EX Manual

    -Two 4T Tracers and manuals

    -Collection Vacuum

    -Water Tank

    -3M Leap Pads for uncoated and hydrophobic lenses.

    -IFP Anti-Slip Pads

    -Maintenance Kit

    -Plano Demo Lenses

    -Deblocking Pliers

    -Full Eye and Half Eye Blocks

    -X17 Replacement Blades

    -AIT Speedy Blocker

    All brand new


    4T Tracer:

    -2,000 point resolution encoder ensures accurate tracing and lens bevel placement

    -Traces metal, plastic and rimless groove frames


    Asking $20,000


    Local Delivery available within 150 miles.

    All equipment is sold "As-Is".

    Shipping and local delivery fees not included.


    Here is a link to the photos of the equipment as Optiboard was having troubles accepting my uploads: https://drive.google.com/open?id=1c_...m-7-Z2YW1Y-RMh
    Last edited by Eyeguy321; 06-30-2018 at 02:50 PM.

  2. #2
    OptiBoard Novice
    Join Date
    Jun 2018
    Location
    Stuart, FL.
    Occupation
    Dispensing Optician
    Posts
    1
    Hello sir. We have an optical here in Stuart and would be interested in talking to you about purchasing this edger. What number can you be reached at?

    Thank You,

    mitch

  3. #3
    Rising Star
    Join Date
    Dec 2009
    Location
    Niagara Region, Ontario, Canada
    Occupation
    Optical Wholesale Lab (other positions)
    Posts
    89
    Quote Originally Posted by Eyeguy321 View Post
    Brand New

    National Optronics 7EX patternless Edger with factory warranty through 11/2018.

    Edger delivered and factory installed late 2017.

    Edger has only 225 total cuts.

    Warranty and phone support with Satisloh USA included.

    https://vimeo.com/266374769


    Features:

    -225 total cut count, mainly calibration.

    -Features a user friendly interface any technician can learn in a couple hours.

    -Help screens available throughout the operation and maintenance functions for ease of use with inexperienced operators.

    -Features an adjustable 15" LCD.

    -Unique dry cutting and three-axis control allows the operator to process CR-39, Polycarbonate, Hi-Index and Trivex lens materials with speed and accuracy.

    -With a blade cutter rather than a grinding wheel, the bevels come out unrounded leading to tighter fitment into the groove of the frame.

    -Electric chucking allows for variable chuck pressures based on materials and coatings leading to less spoilage.

    -OMA compatible and accepts barcode job entry (not included).

    -This Edger cannot process glass lenses.


    Specifications:

    -Height: 28.4" (72cm)

    -Width: 25.3" (64.3cm)

    -Depth: 26.6" (67.5cm)

    -Weight: 143LBS (65.2Kg)

    -Input: 115VAC 60Hz, 1500Watts

    230VAC 50Hz, 1500Watts


    Ranges:

    -Maximum Lens Size: 100mm

    -Minimum Finished "B" Size: 18mm Rimless


    All equipment includes:

    -7EX Edger

    -7EX Manual

    -Two 4T Tracers and manuals

    -Collection Vacuum

    -Water Tank

    -3M Leap Pads for uncoated and hydrophobic lenses.

    -IFP Anti-Slip Pads

    -Maintenance Kit

    -Plano Demo Lenses

    -Deblocking Pliers

    -Full Eye and Half Eye Blocks

    -X17 Replacement Blades

    -AIT Speedy Blocker

    All brand new


    4T Tracer:

    -2,000 point resolution encoder ensures accurate tracing and lens bevel placement

    -Traces metal, plastic and rimless groove frames


    Asking $20,000


    Local Delivery available within 150 miles.

    All equipment is sold "As-Is".

    Shipping and local delivery fees not included.


    Here is a link to the photos of the equipment as Optiboard was having troubles accepting my uploads: https://drive.google.com/open?id=1c_...m-7-Z2YW1Y-RMh
    Is this unit still available?

  4. #4
    OptiBoard Novice OptiBoard Silver Supporter
    Join Date
    May 2018
    Location
    Melbourne, Fl
    Occupation
    Dispensing Optician
    Posts
    3
    Hello Rob, sorry for the delay in reply as I didn’t see your message. The setup has been sold.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. National Optronics Horizon ii edger + more
    By mattschwartz in forum Optical Marketplace
    Replies: 2
    Last Post: 07-25-2019, 12:00 PM
  2. National Optronics Horizon II Edger
    By testhealth in forum Optical Marketplace
    Replies: 2
    Last Post: 06-20-2019, 03:32 AM
  3. National Optronics 6E Edger with new tower
    By randolphraven in forum Optical Marketplace
    Replies: 3
    Last Post: 12-31-2011, 02:54 PM
  4. Advice: National Optronics vs Briot - NEED new Edger
    By odrunr in forum General Optics and Eyecare Discussion Forum
    Replies: 6
    Last Post: 12-30-2010, 05:13 PM
  5. Work on national optronics edger
    By daves in forum General Optics and Eyecare Discussion Forum
    Replies: 3
    Last Post: 02-13-2010, 11:56 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
OptiBoard is proudly sponsored by:
Younger Optics and Vision Equipment