Results 1 to 13 of 13

Thread: Tinting ?

  1. #1
    Rising Star
    Join Date
    Jul 2000
    Location
    WA, USA
    Occupation
    Optical Laboratory Technician
    Posts
    70

    Tinting ?

    when tinting a dark gradient lens on a gradient machine, is there a way to avoid the semi circular effect at the bottom of the lenses? As it is I'm bleaching out the bottoms (sometimes unsuccessfully) Very annoying

  2. #2
    Master OptiBoarder
    Join Date
    Mar 2010
    Location
    north of 49
    Occupation
    Dispensing Optician
    Posts
    3,002
    I think that a shorter stroke on the lift arm, and ensuring the lens holder swings very freely on it's axis is a possible cure for your issue.

    You can try finishing the color by hand dipping for ultimate control.
    Eyes wide open

  3. #3
    Rising Star
    Join Date
    Jul 2000
    Location
    WA, USA
    Occupation
    Optical Laboratory Technician
    Posts
    70
    I'll give it a whirl, Thanks!

  4. #4
    Rising Star
    Join Date
    Jul 2000
    Location
    WA, USA
    Occupation
    Optical Laboratory Technician
    Posts
    70
    Found out the semi circles i was getting are cause by bubbles that form between the lens and the lens holder. Wonder if adding salt to my tints would help? Any thought?

  5. #5
    Master OptiBoarder
    Join Date
    Mar 2010
    Location
    north of 49
    Occupation
    Dispensing Optician
    Posts
    3,002
    Some lens holders are notorious for bubble creation. Try a different one.

    Stirring, or agitation creates bubbles, too.........avoid doing this during the cycle, or immediately prior.

    Stealth paddling only! You might want to try a product called Hot Topper(if it is still made).
    Eyes wide open

  6. #6
    Master OptiBoarder
    Join Date
    Mar 2010
    Location
    north of 49
    Occupation
    Dispensing Optician
    Posts
    3,002
    Quote Originally Posted by Kevin Howtopat View Post
    Found out the semi circles i was getting are cause by bubbles that form between the lens and the lens holder. Wonder if adding salt to my tints would help? Any thought?
    I would worry about salt attacking the steel tank(s). Not a problem with glass containers, tho.
    Eyes wide open

  7. #7
    Master OptiBoarder
    Join Date
    Feb 2010
    Location
    ALBUQUERQUE
    Occupation
    Optical Laboratory Technician
    Posts
    442
    We use a small amount of dish soap in the rinse water to break the surface tension. Also consider setting gradient 3/4 with the last dip slightly submersing the entire lens to remove any bubbles formed on lens holder.

  8. #8
    Rising Star
    Join Date
    Jul 2000
    Location
    WA, USA
    Occupation
    Optical Laboratory Technician
    Posts
    70
    precisionlab Brilliant idea thanks

  9. #9
    Rising Star
    Join Date
    Jul 2000
    Location
    WA, USA
    Occupation
    Optical Laboratory Technician
    Posts
    70
    Uncut you're right didn't think of that

  10. #10
    Manuf. Lens Surface Treatments
    Join Date
    Aug 2002
    Location
    in Naples FL for the Winter months
    Occupation
    Other Optical Manufacturer or Vendor
    Posts
    23,240
    Quote Originally Posted by Kevin Howtopat View Post

    when tinting a dark gradient lens on a gradient machine, is there a way to avoid the semi circular effect at the bottom of the lenses? As it is I'm bleaching out the bottoms (sometimes unsuccessfully) Very annoying

    Try to tint the lens on your gradient arm, instead of removing the dye. Slower process that way but better results.

  11. #11
    OptiBoard Novice
    Join Date
    Apr 2018
    Location
    North CArolina
    Occupation
    Dispensing Optician
    Posts
    1

    EyeMed Insurance

    Is there anyone contemplating doing away with EyeMed?

  12. #12
    Master OptiBoarder
    Join Date
    Feb 2013
    Location
    PA
    Occupation
    Dispensing Optician
    Posts
    1,607
    Quote Originally Posted by IWEARMAN View Post
    Is there anyone contemplating doing away with EyeMed?
    Yes! Will be official in May!

  13. #13
    OptiBoard Apprentice
    Join Date
    Mar 2020
    Location
    Las Vegas
    Occupation
    Optical Laboratory Technician
    Posts
    12
    i wish

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Tinting CR-39 Before UV-NV?
    By Randal Cheek in forum Ophthalmic Optics
    Replies: 23
    Last Post: 11-03-2015, 09:51 AM
  2. Tinting 1.74
    By LENNY in forum General Optics and Eyecare Discussion Forum
    Replies: 8
    Last Post: 04-07-2014, 01:36 PM
  3. Tinting 1.67
    By David@LUXE in forum General Optics and Eyecare Discussion Forum
    Replies: 8
    Last Post: 05-06-2013, 03:53 AM
  4. Replies: 1
    Last Post: 11-07-2010, 10:51 PM
  5. Tinting for $$$$$$
    By thomassaccuci in forum General Optics and Eyecare Discussion Forum
    Replies: 4
    Last Post: 10-22-2004, 05:16 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •