Results 1 to 2 of 2

Thread: What is the thin-edge substance of the lens?

  1. #1
    OptiBoard Novice
    Join Date
    Feb 2018
    Location
    United Kingdom
    Occupation
    Dispensing Optician
    Posts
    1

    What is the thin-edge substance of the lens?

    The lens, –1.75DS / +1.75DC Χ 180 is made in glass, n = 1.56, in toric form
    with a –4.00D base curve and edged 40mm round. The thick-edge thickness
    is 3.14mm. What is the thin-edge substance of the lens?

    I bealive i have to find the sag of +1.75; -1.75 and -4.00 (of course without the sign, but then i don't know the formula to find the thin edge subsatnce.

    please i need help!!!

    Thanks for reading.

  2. #2
    Objection! OptiBoard Gold Supporter shanbaum's Avatar
    Join Date
    May 2000
    Location
    Manchester, CT USA
    Occupation
    Other Optical Manufacturer or Vendor
    Posts
    2,973
    The fact that the base curve is "-4.00" suggests that this is a plus-cylinder configuration, with a toric surface on the front, and a concave sphere on the back (NOT your normal configuration these days) - not that it matters, other than, you may need to keep that in mind to keep your signs straight. In any case, because this is a compound lens (meaning, it has a non-zero cylinder power), there will be points of maximum and minimum thickness around the perimeter.


    The two powers in the major meridia are -1.75 and plano (not -1.75 and +1.75; we have to produce the total power in the cylinder meridian, not the cylinder power).


    The simple power formula is Power = Front + Back (note that the back is almost invariably negative). Refactor that to Front = Power - Back.


    Front(sph) = -1.75 - (-4.00) = 2.25
    Front(cyl) = 0.0 - (-4.00) = 4.00


    The edge thickness in any meridian at 40mm is figured thus:


    ET = (Sag@40(back) - Sag@40(front)) + CT


    Since we know the ET in the thickest meridian (the one where the 2.25 curve obtains), solve for CT using that:


    CT = 3.14 - (Sag@40(4.00) - Sag@40(2.25))
    CT = 3.14 - (1.44 - 0.81)
    CT = 2.51


    For the ET in the thin meridian:


    ET = (Sag@40(back) - Sag@40(front)) + CT
    ET = (Sag@40(4.00) - Sag@40(4.00)) + 2.51
    ET = 2.51


    Of course, in this case, we were really done once we figured the CT, because the ET in the thin meridian is the same as the CT (because the front and back curves are the same).


    All this assumes that they're looking for thin lens calcs, which I'd expect to be the case.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Thick edge substance
    By Optometry student in forum Ophthalmic Optics
    Replies: 1
    Last Post: 09-14-2011, 10:49 AM
  2. Thin Lens
    By kodorovski in forum General Optics and Eyecare Discussion Forum
    Replies: 21
    Last Post: 10-23-2007, 11:35 PM
  3. Edge thickness for -7 1.6 lens
    By Golden Dragon in forum General Optics and Eyecare Discussion Forum
    Replies: 6
    Last Post: 02-26-2006, 08:53 PM
  4. Thin Lens Problems
    By Clive Noble in forum Ophthalmic Optics
    Replies: 11
    Last Post: 06-15-2005, 06:53 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
OptiBoard is proudly sponsored by:
Younger Optics, Vision Equipment and Optitech USA