So my office is looking for some insight/ advice on processing polarized gradients.
The scenario is this:
We want to raise the height of the gradient on the finished product so that the variation is more prominent. Doing that at edging moves the optical center too high, therefore it needs to be done during surfacing.
I use Visual Lab and rely on the preset adjustments to the OC for multifocals but am not versed on how to properly manipulate for cosmetic reasons. A assume that if I enter a -5 in the OC box (within VL) that will set the OC 5 under the center of the lens and therefore raise the gradient for edging, but I figured I might get a second opinion or two before using up my stock.
Thanks in advance!
Bookmarks