Page 1 of 3 123 LastLast
Results 1 to 25 of 58

Thread: Is there a purpose to AR on the back side of a lens?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Rising Star
    Join Date
    Jun 2015
    Location
    midwest
    Occupation
    Other Eyecare-Related Field
    Posts
    56

    Is there a purpose to AR on the back side of a lens?

    Is there a purpose to AR on the back (closer to eye) side of the lens? My understanding is this would only be useful if the lens was large enough where light from behind the lens would strike it. Light coming from in front of the lens would be seen no differently whether the lens had antiglare on the rear side correct?

  2. #2
    Bad address email on file
    Join Date
    Dec 2009
    Location
    East
    Occupation
    Other Eyecare-Related Field
    Posts
    960
    Some people do this on sunglasses to reduce reflections from the back side of the lens.

  3. #3
    Rising Star
    Join Date
    Jun 2015
    Location
    midwest
    Occupation
    Other Eyecare-Related Field
    Posts
    56
    Yea this is pretty much the only observable difference i could think of is if you had a big pair of sunglasses that hang over your face.

  4. #4
    Manuf. Lens Surface Treatments
    Join Date
    Aug 2002
    Location
    in Naples FL for the Winter months
    Occupation
    Other Optical Manufacturer or Vendor
    Posts
    23,240

    Blue Jumper people do this on sunglasses to reduce reflections ................

    Quote Originally Posted by Speed View Post

    Some people do this on sunglasses to reduce reflections from the back side of the lens.
    Yes some people do.

    However it is another gimmick to make more sales for more money.

    Who likes it best ...............the optician that sold it.

  5. #5
    Master OptiBoarder
    Join Date
    Feb 2013
    Location
    PA
    Occupation
    Dispensing Optician
    Posts
    1,607
    Quote Originally Posted by Chris Ryser View Post
    Yes some people do.

    However it is another gimmick to make more sales for more money.

    Who likes it best ...............the optician that sold it.
    What??? I see a huge difference. Wouldn't want suns without it.

  6. #6
    Bad address email on file
    Join Date
    Dec 2009
    Location
    East
    Occupation
    Other Eyecare-Related Field
    Posts
    960
    Quote Originally Posted by Chris Ryser View Post
    Yes some people do.

    However it is another gimmick to make more sales for more money.

    Who likes it best ...............the optician that sold it.
    HMMMM. I am pretty sure I like my polarized with. Have you ever tried this?

  7. #7
    Chemistrie Eyewear
    Join Date
    Aug 2012
    Location
    Pennsylvania
    Occupation
    Other Optical Manufacturer or Vendor
    Posts
    152
    Quote Originally Posted by Chris Ryser View Post
    Yes some people do.

    However it is another gimmick to make more sales for more money.

    Who likes it best ...............the optician that sold it.
    I have seen demos that demonstrate the UV reflection off the backside of a lens.

  8. #8
    Rising Star
    Join Date
    Jun 2015
    Location
    midwest
    Occupation
    Other Eyecare-Related Field
    Posts
    56
    Quote Originally Posted by Joe Zewe View Post
    I have seen demos that demonstrate the UV reflection off the backside of a lens.

    Did it show AR caused UV reflection off the back side? Or no-AR caused UV reflection off the backside?

    Because if backside AR allowed UV to "pass through" and not reflect into the eye, wouldn't this mean frontside AR allows it to pass through directly into the eye lol which it doesnt.

  9. #9
    O.D. Almost Retired
    Join Date
    Dec 2009
    Location
    California
    Occupation
    Optometrist
    Posts
    998
    You need to know that thin film coatings reflect the same wavelengths in the same amounts regardless of whether the radiation arrives at the film from air or from lens substrate.
    Last edited by Dr. Bill Stacy; 02-04-2016 at 11:54 AM.

  10. #10
    O.D. Almost Retired
    Join Date
    Dec 2009
    Location
    California
    Occupation
    Optometrist
    Posts
    998
    I think backside AR coatings on sunglasses are a good idea but have one caution. The blue hue AR (and some of those I've seen look more like blue reflectors than AR) are potentially dangerous unless all backside illumination can be eliminated (e.g. by using full wrap frames that block backside lighting, or by sporting a very large and fluffy hairdo that can do the same thing, etc). My rationale for this concern is that blue reflective coatings also reflect UV, and to the extent the back side of a lens is concave toward the eye, both the backside blue and UV are concentrated on the eye and adnexa.
    Last edited by Dr. Bill Stacy; 01-26-2016 at 04:08 PM.

  11. #11
    OptiBoard Professional Dustin.B's Avatar
    Join Date
    Feb 2015
    Location
    Fairbanks Ak
    Occupation
    Dispensing Optician
    Posts
    116
    It's not just sunglasses, I've seen the back reflection issue with regular glasses as well it just depends on the nearby lighting really.
    ~Dustin B. AboC

    "Laugh, or you will go crazy."

  12. #12
    Bad address email on file
    Join Date
    Mar 2014
    Location
    Johnson City, NY
    Occupation
    Optical Wholesale Lab (other positions)
    Posts
    11
    Or if you have a ridiculous Rx like me (-16.00/-10.00). Growing up in the 70's and 80's when the frames were all ginormous, I could pretty much see everything going on behind me. When I got my first pair w/ AR on them, it made a HUGE difference. Now that my frames are smaller, it may not make that much of a difference, but I'd rather not find out.

  13. #13
    Rising Star
    Join Date
    Jun 2015
    Location
    midwest
    Occupation
    Other Eyecare-Related Field
    Posts
    56
    -16 /-10 ? That almost seems like you'd need AR on the side too, do you have a preference with them being polished or not polished? i imagine polished would look better cosmetically but probably function worse since they would let more light in

  14. #14
    Bad address email on file
    Join Date
    Mar 2014
    Location
    Johnson City, NY
    Occupation
    Optical Wholesale Lab (other positions)
    Posts
    11
    Quote Originally Posted by sdgibbs View Post
    -16 /-10 ? That almost seems like you'd need AR on the side too, do you have a preference with them being polished or not polished? i imagine polished would look better cosmetically but probably function worse since they would let more light in
    Always been roll & polish. Vanity won that battle, I guess. Except when I was a kid. Nothing but glass! Out of curiosity I just measured outside thickness of current od. 9 mm.

  15. #15
    Rising Star
    Join Date
    Jun 2015
    Location
    midwest
    Occupation
    Other Eyecare-Related Field
    Posts
    56
    Yea unless I was a professional outfielder in the MLB i'd prefer not to have any AR on my sunglasses rather than the back side only. One less thing to damage.

  16. #16
    Master OptiBoarder
    Join Date
    Aug 2008
    Location
    Seattle
    Occupation
    Dispensing Optician
    Posts
    1,019
    Light comes to us from all directions and will reflect from the ocular surface back into the eye regardless of the lens size. Hence, front and back surface on clear/photochromatic ophthalmic lenses.
    I didn't attend the funeral, but I sent a nice letter saying I approved of it. Mark Twain

  17. #17
    Rising Star
    Join Date
    May 2014
    Location
    Oregon
    Occupation
    Optical Laboratory Technician
    Posts
    60
    Quote Originally Posted by Paul Smith LDO View Post
    Light comes to us from all directions and will reflect from the ocular surface back into the eye regardless of the lens size. Hence, front and back surface on clear/photochromatic ophthalmic lenses.
    This is exactly why backside AR as well, whether you notice it or not UV light IS bouncing off the back of your lens especially on smaller frames. And also for the stronger myops it will reduce visual reflections and add a nice scratch resistance to the backside as well.

  18. #18
    Master OptiBoarder
    Join Date
    Jun 2008
    Location
    Seattle WA
    Occupation
    Optical Wholesale Lab (other positions)
    Posts
    3,137
    Quote Originally Posted by Paul Smith LDO View Post
    Light comes to us from all directions and will reflect from the ocular surface back into the eye regardless of the lens size. Hence, front and back surface on clear/photochromatic ophthalmic lenses.
    Yes, even though the amount of light is small, it has tendancy to move the focus of the eye because of its seemingly near location. It can cause focus to change involuntarily, eye fatigue, and just be annoying.

  19. #19
    Master OptiBoarder
    Join Date
    Jun 2000
    Location
    California
    Occupation
    Dispensing Optician
    Posts
    2,820
    No matter what size a sunglass frame is I see the reflection of my eyes and eyebrows in the lens, if I don't have AR on the cc surface.

  20. #20
    OptiBoard Professional OptiBoard Silver Supporter
    Join Date
    Jun 2012
    Location
    Elko, Nevada
    Occupation
    Dispensing Optician
    Posts
    188
    I am plano, and I require backside ARC on all my sunglasses (wrap or flat). Call me picky, but those little reflections do bug me.

  21. #21
    Master OptiBoarder
    Join Date
    Mar 2010
    Location
    north of 49
    Occupation
    Dispensing Optician
    Posts
    3,002
    Quote Originally Posted by sdgibbs View Post
    Is there a purpose to AR on the back (closer to eye) side of the lens? My understanding is this would only be useful if the lens was large enough where light from behind the lens would strike it. Light coming from in front of the lens would be seen no differently whether the lens had antiglare on the rear side correct?
    Purpose 1) To leave desired front side appearance of a lens intact.
    2) To partially improve light transmission through the lens.........while leaving some of the raw lens cosmetic appearance intact.
    3) To combat the often mirror-like surfaces reflections created in lenses that are laminated, or front-side only tinted, or mirrored.
    4) To help with back-surface reflections caused by environment, like snow, or occupational.
    5) To assist in reducing the static charge buildup noted on the back side of lenses.........due to lens raw material choice in some occupations.
    Eyes wide open

  22. #22
    Master OptiBoarder
    Join Date
    May 2012
    Location
    UK
    Occupation
    Optical Laboratory Technician
    Posts
    941
    Bright light can reflect from the eye to the back of the lens, before returning to the eye, causing a dazzling effect. A back surface AR eliminates this.

  23. #23
    Master OptiBoarder
    Join Date
    May 2012
    Location
    UK
    Occupation
    Optical Laboratory Technician
    Posts
    941
    I thought it was generally accepted that a back surface AR was quite important... particularly for night driving or sunglasses.

  24. #24
    Rising Star
    Join Date
    Jun 2015
    Location
    midwest
    Occupation
    Other Eyecare-Related Field
    Posts
    56
    Quote Originally Posted by Robert_S View Post
    I thought it was generally accepted that a back surface AR was quite important... particularly for night driving or sunglasses.
    Wouldn't that be the front surface AR? 99.9% of the light that hits the lens will be from cars in front of you. 0.01% would be light from the cars, going through the lens, bouncing off your eye, back into the rear of the lens AND THEN striking the eye again.

  25. #25
    Bad address email on file
    Join Date
    Dec 2009
    Location
    East
    Occupation
    Other Eyecare-Related Field
    Posts
    960

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Turning my back on the dark side...
    By MikeAurelius in forum Just Conversation
    Replies: 8
    Last Post: 02-14-2011, 10:31 AM
  2. Replies: 1
    Last Post: 04-18-2006, 04:49 PM
  3. come in to talk about the benifits of the back side add
    By seanl in forum Progressive Lens Discussion Forum
    Replies: 4
    Last Post: 07-03-2005, 11:42 AM
  4. rebuilt gerber back side coaters
    By gpw_ww in forum General Optics and Eyecare Discussion Forum
    Replies: 0
    Last Post: 11-12-2003, 09:54 AM
  5. Ultra Optics Back Side Coater
    By Mike Fretto in forum General Optics and Eyecare Discussion Forum
    Replies: 8
    Last Post: 08-09-2000, 11:11 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •