Hello. I'm a system developer and i'm initializing a integration with the Tracer LT 980 Satellite Nidek, using serial port RS232c.
I'm having troubles in establishing a session with the device. I've done the configuration of the serial port (9600,8,N,1), as I've read in the OMA Protocol, as soon as I made a connection with the Tracer automatically will be send a request of initialization.
According the OMA Protocol, I have to send the following datas:
<ACK>
<FS>ANS=INI<CR/LF>
STATUS=0<CR/LF>
<RS>
<GS>
But, before I send those datas, I have to received these datas:
<FS>REQ=INI<CR/LF>
<RS>
<GS>
Besides not receive any datas sending "REQ=INI", I don't receive any information of the device.
I've tried sending those commands bellow, but i don't get any answer as well. Only when I send "<ENQ>(ASCI 5 ou 0x05)", I receive a "<ACK>(ASCII 6 ou 0x06)" and nothing else.
<LF><DLE><SOH><STX>REQ=TRC<DLE><ETX>
0x10,0x02,0x05,0x01,0x07,0x06,0x10,0x03,0x0E
My main question is : Which is the correct way to send those codes?
ps.: The fields between tags "<>" will be changed to ASCII Code.
Thanks,
Eduardo
Bookmarks