I am very new on freeform. Has Innovations for years and IOT software recently installed.
On regular blended bifocal, Innovations will rotate the lens so it can be used on larger frames.
On IOT Blended lenses, the software (Innovations or IOT) does not rotate the lens and error "Lens too small" is frequent.
The same error happens to progressive and large frames. So seems to me that the generator (orbit) is not being instructed by the software to place the progressive off center on the blank same as happens with the blended bifocal.
Wich setting has to be set to accomplish that?
Also. When blocking a regular blended bifocal to be edged, on our AIT speede blocker I see a decenter image with 2 vertical lines for the reading part and a dot for the far distance optical center. On jobs (I has done only 2 jet) I see 3 dots.
Is this IOT lens treated different at blocking than regular blended bifocals?
Need help too to set IOT so ULTIMATE-B accept _Lplus suffix. It is accepting The lenticular suffix.
The LDS returned the following
XSTATUS=B;106;Product not found in your products database;E
Bookmarks