Just got off work today I had lenses that I had to redo again coz off AR scratches I put tape front and back on lenses I clean lenses with microfiber rags I wonder why I get scratches I work with optironic edger any advice guys?
Just got off work today I had lenses that I had to redo again coz off AR scratches I put tape front and back on lenses I clean lenses with microfiber rags I wonder why I get scratches I work with optironic edger any advice guys?
They are defective lenses. Return them for credit and so your supplier/manufacturer can look at the problem and find a solution or cause. It's not your fault when lenses can't survive your "industry standard" processing as you have described. Chuck pressure, check. Protective tape, check. Lenses still scratched, bad sub coating or A/R coating. If your supplier does not back you up, you are using the wrong supplier.
scratches or the center of minus lenses is marked from the scratch coat cracking?
Scratches you can feel with your nail.
It's scratches
The fact that they are polycarbonate does not have anything to do with the scratches appearing... could happen in absolutely any material.
So are the scratches (if you are SURE they are not stress cracks) behind the chuck/block? Or are they anywhere on the lens?) Did it happen on both lenses? Does it happen often?
Double check your chuck and block. Double check your pressure setting on your edger.
Nothing in all the world is more dangerous than sincere ignorance and conscientious stupidity
You mentioned in another post you are using an "AR pen" Make sure the marking ink is water soluble and pen is not metallic like color..when dried the dots and markings from pen can act like paint chips and scratch lens as you try to remove
Polycarbonate is a softer material. Unlike a basic plastic lens, polycarbonate lenses are impact resistant. The reason for this is because they are softer to absorb the shock. Polycarbonate lenses scratch all the time.
When it comes to crazing from lens flexing poly is definitely the main culprit there (or rather poor edging, mounting or center thickness) . Scratches and delaminations in my experience are the result of coating failure or customer "user error"
FEATURES AND BENEFITS
VISION-EASE LENS POLYCARBONATE LENSES WITH TEGRA SCRATCH-RESISTANT COATING.
Safer:
They are over 10 times more impact resistant than plastic lenses protecting your eyes from the unexpected. They can withstand the impact of a 135 MPH baseball without shattering.
Thinner:
They are 50% thinner than plastic for a slimmer, more attractive profile.
Lighter:
Tired of glasses that slide down your nose? Polycarbonate lenses with Tegra Scratch-Coat are 50% lighter than plastic lenses for more comfortable eyewear that stays put.
More Scratch Resistant:
Polycarbonate lenses with Tegra Scratch-Resistant coating makes them six times more scratch resistant than plastic lenses for long-lasting durability at a great value.
Superior UV Protection:
Vision-Ease Lens polycarbonate lenses block 100% of the sun’s harmful rays to protect your eyes outdoors.
From the former sponsor of OptiBoard's website:
https://www.vision-ease.com/home/con...-benefits.aspx
You did the right thing. I am fully with you, CR39 should not be called "just plastic".
The first plastic lens I ever came across as a young guy was the in the UK made "Igard" which where so soft that we had to polish them all the time by hand.
I just copied the text from the Vision Ease website the way it came. Vision Ease is a good company and their staff is very friendly.
One thing to note as well is that for poly we should only be using a premium AR that's going to add to the scratch resistance. A standard AR won't make for a happy pt if they're looking for both impact resistance as well as scratch resistance
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks