Which finishing blocks you use and why? Thinking about switching.
Which finishing blocks you use and why? Thinking about switching.
What machine and what do you currently use?
For my Kappa, I prefer the flexible blocks. We do a lot of AR, and I have found that the flexible blocks better at absorbing or redistributing that chuck pressure so I have no crazing when used with my secure edge pads.
"Some believe in destiny, and some believe in fate. But I believe that happiness is something we create."-Something More by Sugarland
Thanks. Running Optronics 7E and 6 using metal 3m type blocks. Having some trouble with 1.67 and up with AR. Leaving marks as if too much chuck pressure yet lower pressure does not help. Thinking about switching to plastic flex blocks. So many of them I'm unsure which is best.
See link http://precisiontooltech.com/
Consider chuck change as well...makes all the difference for high index and AR edging
Sounds like good advice...which block would you recommend? Why?
Hello there had this problem with this edger but I did put anti slip blue tape at the front of the lens after I mark my axis with ar marker and put a couple of the same tape on the back of the lens where the Chuck will hold the lens it will come Allright I had this problem with the same edger.
PRECISIONLAB Thank you for the shout out for Precision Tool and our edge blocks. We currently have over 140 different options for edging blocks. Our goal is to provide solutions for different needs in the optical lab and retail lab.
Peyes, if you have any questions on edge blocks, chucks, followers, or other edging tools please don't hesitate to contact us.
jared@precisiontooltech.com or 1-800-450-8665 ext 1703
Thanks, Jared
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks