Hello Board Members,
we have some used optical equipment we need to sell quickly. we are downsizing the office and need to sell these older machines. We need to get them out of the way by 2/18/15. make an offer on all or any if interested. Again we have to move them out quickly.
- 113MX manual mattic generator by Coburn industries. it is a 220V motor runs good can use a new slurry bucket Tan color ($ make anoffer)
- two 5056 cylinder machines (two individual side by side units), again made by Coburn. these are better for parts or reconditioning. they need spindle bearings and possible wobble assembly. but they are still working. they just have some play in the lap tables. Tan color ($ make an offer)
- CS7 lens axis marker, works good, new bulb, can use a ink bowl. but has a new ink pad.Tan color ($ make an offer)
- Alloy blocker Model 101, filled with 117 alloy (About 8-10 LBS ) green in color heats up and flows nice.
- Psi surface saver tape, Manuel machine no air.
- odd set of aluminum/Plastic laps (original Coburn 5.23 index)missing some powers, but capable of filling 80% of the RX's
- HorizonII pattern lens edger. has 25K cuts needs the lens chuck and blade assembly
- Wecco 440 patterned edger, the handle to lift the head is broke other than that looks to be complete
-AIT 410 pattern-less edger with tracer. never really tested it but it looks all there
- a pair of essilor 900MX/digiscan with tracers. edgers ran, but tracers were finicky. no bar code reader to get into the diagnostic. they are best for parts
- BPI tint unit with a gradient/hood 8 pot quart size
- there are some odd and end pieces. please ask we may still have it in the back room. we have some wall display fixtures as well. this is a 25 year old practice with full surfacing lab. we are down sizing and need to move everything out by 2/19/2015 our lease is up and we don't want to put anything in storage. not sure how to post pictures on this post, as it is all new to us.
email pongo70205@aol.com
Bookmarks