Here is the Rx to be used.
+3.00 +1.00 X 75 +2.75 Add 2.0 Base out
+5.75 +1.50 X 05 +2.75 Add 3.0 Base out
Will be using FT 28 clear glass.
What I would like to do is have this Rx ground on a flat base curve so that I can laminate it onto the inside of a dive mask. I have done this many times with a myopic Rx and it works very well . But I have reservations as to how well the pt will do with a Rx like this.
The reason for laminating is to help reduce fogging that you get when you use a mask with a frame mount inside it. Using a frame is not totally out of the question, no doubt that would work just fine, but it is the last resort.
Any input? Suggestions?
Thanks in advance.
Bookmarks