Large stock of gerber,coburn and weco rare parts,job lot or seperate

[northoptical]

Hello Everyone.

I have a large stock of new gerber,coburn and weco parts for some of the older machines that you may find it difficult to source parts for!

I have gerber parts for the sgx,step one blocker and lens washer.

I have parts for the weco cnc 90,nc 90,zet etc including all the tracers and cads

I have parts for coburn 1008 ,108 cyl 500,toric ,blockers,cs7,reclaim tank etc.

I also have low volume step one and sgx with chiller,step one has storage damage but is cheap!

many main boards that you cannot buy now,looking to sell seperate or as a job lot,It would be ideal for a company that supports this kind of kit.

If you need any parts please send me a list and i will let you know if i can supply,based in the uk but can ship easily.

Thanks John

[ojiakucanada]

Do you have diamond cutter,probe and calibration tool for IQSL2 generstor and what is your prices.

Felix


I have a large stock of new gerber,coburn and weco parts for some of the older machines that you may find it difficult to source parts for!

I have gerber parts for the sgx,step one blocker and lens washer.

I have parts for the weco cnc 90,nc 90,zet etc including all the tracers and cads

I have parts for coburn 1008 ,108 cyl 500,toric ,blockers,cs7,reclaim tank etc.

I also have low volume step one and sgx with chiller,step one has storage damage but is cheap!

many main boards that you cannot but now,looking to sell seperate or as a job lot,It would be ideal for a company that supports this kind of kit.

If you need any parts please send me a list and i will let you know if i can supply,based in the uk but can ship easily.

Thanks John

[/QUOTE]

[northoptical]

Hello Felix....would have been nice to say yes to the first response...But sorry no parts for this model at all.

John

[Pat McCoy]

Hi John,

Please check your private messages. Thank you!!

Adam McCoy

[northoptical]

Hello Adam

Did you receive the list.

John

[vin]

do you have drive belts for weco 486 b? here's the part # 3132-0209 3132-0210.
thanks
VIN

[Pearlehamden]

do you have a main board for Gerber Step One Blocker Model# BL-1?

[ioptic]

Hi,pl

s send me a list of sgx parts

[northoptical]

do you have a main board for Gerber Step One Blocker Model# BL-1?

Hello yes i think i do can you send me part number?

John

[northoptical]

Hello Adam

Did you receive the list.

John

Hello Adam Do you have copy of the gerber parts list i sent you if so could you send it back to me ,Computer crashed and i dont fancy doing it all again.

Thanks John

[John Pittarese]

Hello

I have an older Gamma i need a zero signal board for, if you have a parts list for gerber / essilor gamma parts that would be great.

Thanks John

[northoptical]

Hello

I have an older Gamma i need a zero signal board for, if you have a parts list for gerber / essilor gamma parts that would be great.

Thanks John

Hello thanks for the interest but i dont have any parts for essilor...sorry

John

[northoptical]

[Hello Everyone


The weco parts are now sold but still have a lot of coburn and Gerber parts.Need to get these to a good home they are no use to me any more.About 15 k dollars worth of Gerber parts and at least he same in coburn. Open to any offer!!!




John[/QUOTE]

[ojiakucanada]

I see you still have the optical parts for sale. I am interested and would like if you can send them to my e-mail;ojiakucanada@sympatico.ca. This will enable me to look at the list.

Also,let me know your final offer for the whole list.
Felix

[ojiakucanada]

Mr.John,

Thank you very much for the list of stock lots gerber coburn parts sent to me via Optiboard. Please,can you resend the complete list again to my e-mail address;
ojiakucanada@sympatico.ca
Felix
613-3024188

[Barikat]

Hi, I need the test fixture P/N 148823 and tooling ball P/N 105992 for SGX. If there is a inform b.a.r.2@mail.ru

[dgroppi]

Hello,

I have a large stock of new gerber,coburn and weco parts for some of the older machines that you may find it difficult to source parts for!

I have gerber parts for the sgx,step one blocker and lens washer.

I have parts for the weco cnc 90,nc 90,zet etc including all the tracers and cads

I have parts for coburn 1008 ,108 cyl 500,toric ,blockers,cs7,reclaim tank etc.

I also have low volume step one and sgx with chiller,step one has storage damage but is cheap!

many main boards that you cannot buy now,looking to sell seperate or as a job lot,It would be ideal for a company that supports this kind of kit.

If you need any parts please send me a list and i will let you know if i can supply,based in the uk but can ship easily.

Thanks John

[/QUOTE]

[dgroppi]

Hi,
I am in need of a heat control curcuit board on the back wall of eclipse blocker 260184 i believe is part number please email info to sandykawa1@yahoo.com
, do u have feller assembly for briot accura cx also i reside in cleveland ohio 216-751-9800

[industryeyes]

Hi John,
I have just aquired 2 SOS advantage + machines which are re worked Coburn Toric Surfacers.
Do you have any parts for these? Also would you know hwere I could get a user/parts manual?
Thanks,
Rob.

[NICOLAS GUILLEN]

Hello

I have an older Gamma i need a zero signal board for, if you have a parts list for gerber / essilor gamma parts that would be great.

Thanks John

Hi john do you weco w2-D parts?

[miguiycaro]

Hi everyone.
Jhon, i'm looking for baffles for an gerber apex cilindrical machine, do you have parts for it?