Gerber coburn sg-x

**cycodelico7** · 11-17-2011, 02:14 PM

Good day to all, and thank you for the warm welcome. my name is luciano, i just finished purchasing a generator gerber coburn SG-X, but im getting the

z servo error, the problem is that i do not have a service manual nor a owners manual.

can anyone give me a tip, some help. or maybe tell me where i can find a service or owners manual.

thank you very much in advance.

**Groundrunner** · 11-17-2011, 05:51 PM

What is your email, I have the manuals in PDF format I can send you.

**cycodelico7** · 11-17-2011, 06:22 PM

Thanks, i would greatly appreciate that. My email is cycodelico@yahoo.com

**Groundrunner** · 11-17-2011, 07:25 PM

I sent all the info to you.

**cycodelico7** · 11-17-2011, 07:34 PM

Thanks... I figured out the problem.. The generator was only receiving 110v on the power supply when it needs at least 118 with everything running so i installed it on its own circuit. For future reference on the back you need 118v minimum and on the two white fuses inside you need at least 37.

Thank you very much for the manuals if ou eed anything dont hesitate to pm
Me.

**Look To The Stars** · 11-18-2011, 08:22 AM

Groundrunner,
any chance of you sending those manuals my way? Johnny.des@gmail.com
I have the Binders that came from Gerber, but a PDF would be great to have.

Our SGX is a real workhorse, and rarely has any trouble, but you can never be too prepared!

**Barikat** · 07-16-2012, 11:30 AM

I've the same problem. Need user manual for the SGX. I will be grateful if someone could send it to my email barikat@wosir.ua.

**Groundrunner** · 07-16-2012, 11:36 AM

Originally Posted by Look To The Stars

Groundrunner,
any chance of you sending those manuals my way? Johnny.des@gmail.com
I have the Binders that came from Gerber, but a PDF would be great to have.

Our SGX is a real workhorse, and rarely has any trouble, but you can never be too prepared!

Sorry for the super late response. I will send you all the info today.

**Groundrunner** · 07-16-2012, 11:40 AM

Originally Posted by Barikat

I've the same problem. Need user manual for the SGX. I will be grateful if someone could send it to my email barikat@wosir.ua.

I will send out the info today.

**Groundrunner** · 07-16-2012, 12:00 PM

The email is not going through. DNS error. Domain name not found.

**Barikat** · 07-16-2012, 03:06 PM

Originally Posted by Groundrunner

The email is not going through. DNS error. Domain name not found.

Hmm, it's strange. Then could you send it to my another email bars_plus@mail.ru ?

**Groundrunner** · 07-16-2012, 03:26 PM

looks like that worked

**Barikat** · 07-17-2012, 01:30 PM

Thank you. There are still good people

**DHN68356** · 07-17-2012, 03:18 PM

Any chance I could get a copy of those PDF Manuals as well. The SGX at my wife's lab is acting up and I am way too rusty on my SGX knowledge to help her.

Thanks in advance!

**Tommyj** · 08-15-2012, 10:24 PM

I would like to get in on getting a PDF for the SGX. The manual I have is for repair but I need more information on machine setup and settings to use for cutting plastic tools. Can you help a guy out? tjohnson@essilorusa.com

**Emma Imaging** · 12-27-2012, 05:05 AM

Hi, Groundrunner , can you email the pdf manual to me ? thanks in advance.

borisharris897@hotmail.com

**Ichaban** · 06-29-2013, 08:39 AM

Hey, Groundrunner, is there any way you can email me a copy of the PDF? The manual I have is for maintenance, and I need more information on the material settings, and how to fix those. My email is alex@davescooltoys.com. Thanks!