Can anyone recommend a computer software for a finishing lab currently finishing about 40 pairs a day.Looking to expand with the proper software.........thanks.
Can anyone recommend a computer software for a finishing lab currently finishing about 40 pairs a day.Looking to expand with the proper software.........thanks.
By finishing lab, you mean edging only?
If that's the case software is not required, just directly interface your tracer with your edger. Or are you trying to use one tracer to "feed" multiple edgers?
If you are only doing 40 pr./day one edger is more than enough. I think my highest is 70 in a day with my ole NOP 6e/4t
Clinton Tower
The intellect to live free is in short supply
ALT248=°
We do edging into frames. But I am looking for something that can keep track of everything.....when order was placed , when it gets delayed , why, when is eta, etc.....
Contact Optivision, the Digi-trace may be what you need. Tell Bruce I sent you :D
Hi, Jonah ~
If you're looking for Finishing Lab Software, we have two primary versions:
1) DigitalTrace = intended for retail, edging finished lenses, send traces & Rx orders from multiple locations to central edging location.
2) Optivision LMS = intended for wholesale, customers anywhere in the world can send you orders online, including traces, so you have nothing to re-key, Online job status so you don't have to look for orders, customers can see all their jobs 24 hrs/day and/or get an email or fax. Optivision also has built-in accounting so you can auto-generate statements, volume discounts, etc. and no-rekeying into QuickBooks or Peachtree or whatever.
There is so much more.
Please send me an email or PM, Jonah, & I'll send you more info for you to look over at your leisure, OK?
Optivision, Inc.
LMS Lab Software
Remote Tracing/Edging
602.277.2614 x2
www.optivision.com
www.digitaltrace.net
bruce@optivision.com
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks