Results 1 to 10 of 10

Thread: HELP ERROR 0501 Nidek 7070

  1. #1
    OptiBoard Apprentice
    Join Date
    May 2008
    Location
    Sofia, Bulgaria
    Occupation
    Optical Retail
    Posts
    30

    HELP ERROR 0501 Nidek 7070

    Good day,

    I would like to ask you for some help with a problem with my edger. There is an eror 0501 when I open the chucks and after this some strange shriek is heard. Do you know what does it mean, how can I deal with this problem? The error appears on the screen even after I turned off the edger and then turn it on again.

    Many thanks and waiting for your reply.

    Regards,
    Kiril Kitanov

  2. #2
    OptiBoard Novice
    Join Date
    Nov 2006
    Location
    Kuala Lumpur
    Occupation
    Other Optical Manufacturer or Vendor
    Posts
    4
    it seems that you are having problem with your chuck shaft. The key and bearing inside probably need to be change. also check the limit switch whether it is functional as usual. hope that it helps!!

  3. #3
    Vision Equipment OptiBoard Corporate Sponsor
    OptiBoard Gold Supporter
    Leo Hadley Jr's Avatar
    Join Date
    Mar 2003
    Location
    Florida
    Occupation
    Other Optical Manufacturer or Vendor
    Posts
    1,653
    Quote Originally Posted by optiville View Post
    it seems that you are having problem with your chuck shaft. The key and bearing inside probably need to be change. also check the limit switch whether it is functional as usual. hope that it helps!!
    Agreed

    Also check wiring and connectors from the swtich and motor to the board.
    Leo Hadley Jr
    Vision Equipment
    T: 855.776.2020

    www.visionequipmentinc.com

  4. #4
    Bad address email on file
    Join Date
    Sep 2011
    Location
    Azerbaijan
    Occupation
    Lens Manufacturer
    Posts
    2
    help error 0103 nidek 7070

  5. #5
    Bad address email on file
    Join Date
    Sep 2011
    Location
    Azerbaijan
    Occupation
    Lens Manufacturer
    Posts
    2
    I would like to ask you for some help with a problem with my edger. There is an eror 0103.
    Thank you. I'm waiting your help!

  6. #6
    OptiBoard Novice
    Join Date
    Nov 2006
    Location
    Kuala Lumpur
    Occupation
    Other Optical Manufacturer or Vendor
    Posts
    4
    what's the system does it shown? error 0105 is regarding the tachometer. it need a oscilloscope to tune by putting at tp2 at BA01. Can't remember much on error 0103

  7. #7
    OptiBoard Novice
    Join Date
    Nov 2006
    Location
    Kuala Lumpur
    Occupation
    Other Optical Manufacturer or Vendor
    Posts
    4
    hi leo! i was wondering if you sell used nidek LE9000 LX or SX??

  8. #8
    Vision Equipment OptiBoard Corporate Sponsor
    OptiBoard Gold Supporter
    Leo Hadley Jr's Avatar
    Join Date
    Mar 2003
    Location
    Florida
    Occupation
    Other Optical Manufacturer or Vendor
    Posts
    1,653
    Error 0103 is a grind pressure error. Check the low grind switch up above the spring on the left side. Chances are it is stuck or unplugged.

    Hi Optiville, Yes we sell all the 9000 series models.
    Leo Hadley Jr
    Vision Equipment
    T: 855.776.2020

    www.visionequipmentinc.com

  9. #9
    OptiBoard Novice
    Join Date
    Nov 2006
    Location
    Kuala Lumpur
    Occupation
    Other Optical Manufacturer or Vendor
    Posts
    4
    yah!! sometimes when i forgot to plugin the grind switch connector and this error code will appear. no wonder it seems familliar. Leo, can you quote to me. my email add is optiville@gmail.com.

  10. #10
    OptiBoard Apprentice
    Join Date
    Mar 2012
    Location
    Dominican Republic
    Occupation
    Optical Laboratory Technician
    Posts
    15
    Does somebody knows What means error 0105 in a nidek le-7070sx?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Nidek Le 7070
    By Refractingoptician.com in forum Optical Marketplace
    Replies: 2
    Last Post: 04-29-2007, 02:00 PM
  2. Opinions on a NIdek 7070 ?
    By Refractingoptician.com in forum General Optics and Eyecare Discussion Forum
    Replies: 3
    Last Post: 03-01-2007, 07:52 PM
  3. Code Error for Santinelli Edger 7070 3d
    By Drod3210 in forum General Optics and Eyecare Discussion Forum
    Replies: 14
    Last Post: 03-06-2006, 02:29 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
OptiBoard is proudly sponsored by:
Younger Optics and Vision Equipment