Product: Mini-Vice
Vendor: Preview Optical Supplies
Vendor Home Page: www.previewoptical.com
Category: Dispensing Tools/Equipment
Reviewer: Robert Wagner
Ratings:
Quality:
Ease of use:
Client acceptance (if applicable): n/a
Customer service of the manufacturer or distributor:
Value:
Overall:
Review:
Many of us have a difficult time changing a spring or ball bearing temple (or at least I have.) I found, and ordered this "mini-vise" and for me it has saved so much time and effort in changing the hardest temple a breeze I must share this with you.The mini-vise works by 1st inserting a small metal post (supplied) when temple is aligned with the frame front hinge where the screw should go, then put in place the mini-vise. While holding the temple and frame front, stretch the spring to the maximum, when the spring is fully stretched place the STEEL WIRE that is on the mini vise as close as possible to the spring case then close the vise. This now is holding open the spring (with the wire & vise) remove the Metal post, you can then go wait on a patient come back and all is exactly as you left it. Install the screw, remove the vise and bingo your done! The whole process takes about 1 minute. If you or your staff are having trouble with spring hinges, this mini-vise works. I have purchased other products from this company and will continue to in the future. Robert Wagner
Bookmarks