Results 1 to 1 of 1

Thread: * Calculations & Machine Interface *

  1. #1
    OptiBoard Professional brucekrymow's Avatar
    Join Date
    Aug 2004
    Phoenix, AZ USA
    Other Optical Manufacturer or Vendor

    * Calculations & Machine Interface *

    OptiCalc™ Rx Calculation & Machine Interface System

    The Optivision© OptiCalc™ software system is designed to provide Rx calculations for lenses upon order entry of the Rx. The Optivision lens grinding specifications are derived from mathematical, trigonometric, algebraic, plane geometry and physics calculations on each and every lens, not from some “grinding chart”. These original calculations make Optivision© software one of the most accurate systems on the market today.

    Realizing reduction of spoilage is very important to keeping your profits high, the Optivision© system strives to maintain accuracy throughout the system. These calculations provide the lens surfacing information on a shop ticket.

    The software system also incorporates the technology provided in the OptEquip™ system, the software system designed to allow lab machinery from different manufacturers to "talk" to each other. The machine interface component is a unique feature built into the Optivision© system that is designed to allow machines from different manufacturers to communicate with each other throughout the lens making process. The ability exists to trace a frame on one brand of tracer and edge it on yet a different manufacturer’s edger, allowing the freedom to choose preferred equipment without worrying about machine compatibility.

    Please visit us at booth 623 at the world’s largest show exclusively for optical laboratories - The OLA - in Grapevine, Texas at the Gaylord Texan Resort & Convention Center, November 17-19, 2005.

    Find more about Optivision© products, our team and other information at or contact Bruce @ 1.800.795.9927 or now!
    Last edited by brucekrymow; 08-15-2005 at 02:54 PM.

    Optivision, Inc.
    LMS Lab Software
    Remote Tracing/Edging

    602.277.2614 x2

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Santinelli 9000-LE Express Edger $ Less Stress Drill Machine
    By Eddieg in forum Optical Marketplace
    Replies: 5
    Last Post: 08-04-2005, 06:30 PM
  2. Ultra Optics Mini II Back Side Coating Machine
    By Pat McCoy in forum Optical Marketplace
    Replies: 0
    Last Post: 08-16-2004, 02:59 PM
  3. Customized Clip on Machine Needed !
    By Stylz in forum General Optics and Eyecare Discussion Forum
    Replies: 13
    Last Post: 11-06-2003, 01:28 PM
  4. AR Matrix Machine
    By so in forum Optical Marketplace
    Replies: 0
    Last Post: 10-30-2002, 07:19 PM
  5. Facceting Machine
    By PAkev in forum Optical Marketplace
    Replies: 4
    Last Post: 07-18-2001, 05:04 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts