I USED TO WORK FOR GERBER COBURN AS A FIELD SERVICE ENGINEER SO IF YOU NEED HELP LET ME KNOW.
CHEERS
lEE
Type: Posts; User: leestaniforth; Keyword(s):
I USED TO WORK FOR GERBER COBURN AS A FIELD SERVICE ENGINEER SO IF YOU NEED HELP LET ME KNOW.
CHEERS
lEE
Hi,
I have a single vision A+R auto blocker for sale. sold as seen. Would this be something of interest?
it depends on your product mix, skill set of the techs.
if you let me know what these are broken down into surfaced and glazing only, tints, and any rimless i can give you some figures.
lee
Hi, sorry but my question was "sending" via lab software. Not the generators do it. We currently use a combination of centre thickness optimization and "design shift so are currently producing many...
Hi All,
If i send a shape with every order to the generators, what are the production time implications / considerations?
thanks
when you refer to this, are you taking about during ( after fining and polishing) at QC or within or the end of the glazing process?
cheers
lee
The BSI or possible ANSI tolerance chart states that the prism tolerance is calculated upon the "lowest principal power of a pair of lenses"
Example
2.00 -1.00 x 90
0.25 -1.00 180
If i...
Sorry, i'll try again.
The above R Lens RX has an axis of 63. If the axis was
180 you would -3.00 to place into p=c/f, however as the axis is 63.. what power do you have to work with?:cheers:
you can set individual parameters on different frames within innovations for min and max centre sub's. it then calculates from these..
Its in settings navigator, fames types, rimless, right click,...
hi all,
As many have pointed out, prism is prism etc blah blah, and of course you only surface prism into a lens when power of the lens is not enough to induce said prism and cut out into you...
plug a external keyboard in the back also
Hi.. have you changed the software chip? the board GC sent you will not contains this,, you neeed to take it from your old board and replace.. be careful when inserting as the pins are easy bent..
if its just poly, its the cutting speed parameters that are incorrect.. they are prob too fast.. Also ensire your chiller is not too cold.
lol.. it would be helpful if the post statd more clearly when it was posted.. i would not have bothered otherwise..:cheers:
Hi,
this depends on what you want to produce. The basic set up would be surfacing PC, blocker,generator, fining machines de-blocker, inspection lamp. of course you would need tools and tool racks....
I think this i your problem.. what pc programme are you using?
Hi.
i was a GC service enginneer for three years.
What surfacing programme do you use and what blocker do you have?
thanks
lee
hi. it depends on what you mean by cracks... where abouts are they? edge or centre??. if this is happening with all lens types there must be something that is common with all the lenses.. ie the...