Search:

Just out of curiosity is Cherry Optical MI and Cherry Optical Lab WI connected somehow?

The drill assembly in my huvitz 7000 excelon xd edger will not tilt and I was told I need to replace the whole assembly which is very pricey. I do have a smart drill but have never had to use it for...

The electricity in the building recently tripped and once again I am left with some equipment issues. My main problem is the sgx. I had replaced the timer on board 2 which was determined to be faulty...

I was just wondering what is the average time you have waited to hear back from Coburn on a down machine issue?

Just in case this happens to someone else out there all I had to do was reseat the CPU board in the back of the machine.

Came in this morning and turned on the eclipse blocker and it was making a strange sound that resembled a low volume fire alarm:eek: Any input on what this could possibly be?

Apparently my issues stemmed from a power outage we had earlier in the week. I needed to run a systems restore and perform calibration on the machine. Knock on wood, everything has been running...

My ancient SGX is giving me issues again. Originally it started out with a data corrupt 10 error to which I changed a chip on the main board. Everything seemed to be working again until I cut a foam...

Thank you for the advice! It ended up being the motor:cry:

I was running a job at the end of the day when the SGX machine went dead. I checked the fuse and cords and everything seemed fine. I come in this morning and now the Eclipse blocker and SGX won't...

Pretty much my understanding of it. Will no longer be Safilo.

Although this is not surprising to me, just curious to see how many will continue to carry this line?

Thanks. I will definitely look into it.

SGX generator

Thanks! I'll give it a shot.

Polish is about 2 weeks old. I don't run a ton of lenses so I usually can get by changing it about once a month.

Need advice please:cry: I am having problems with a pair of 1.67 progressive lenses. Ran one pair yesterday and the OD had 5 or 6 deep pits with no tails and the OS was fine. I got a new OD in today...

I'm sure there is a simple fix to my problem so please don't judge. I had a lens that I started to edge and got as far as the roughing cycle when a rush job came in. I stopped the lens and figured I...

It is in a really tight spot and of course has an acuity right on the side I need to get at. If I am understanding you correctly it looks like in order to adjust those valves you would have to...

I am having a cutter guard issue again and I can get the guard to open slowly but then it will slam back. Every time this happens the nuts and bolts holding the magnetic sensor either loosen up or...