The hose has a special connector that presses into the water valve at the center front of the machine, it should lock tight at that point. The valve has a lock similar to an air connector, you have...
Type: Posts; User: sgreen; Keyword(s):
The hose has a special connector that presses into the water valve at the center front of the machine, it should lock tight at that point. The valve has a lock similar to an air connector, you have...
Call Dan @ tech support BriotUSA he has a great deal of WECO experience...he will walk you through it. I think it is a thickness issue, the encoder is "off" or not reading the correct lens thickness....
I use a "Diamond" Pen to dull the agressive side. Get it from your optical supplier or this is where I get mine;
http://www.grainger.com/Grainger/productdetail.jsp?xi=xi&ItemId=1611644529&ccitem=
Why not trace the pattern, I know it's a pain but after 12 (?) years...This software may also work;
...
The new Briot Axcell/CL combo on rimless edges, polishes and grooves down to 17.75 mm "B". Now, as of December 1, 2003, the Axcell unit will automatically recognize hole placement on the demo lenses...
I had a machine for awhile and sold clips at Boat shows. E-mail me and I'll give you the contact.
I believe the WECO CadIII will fit your requirements...it's OMA compatible.
I use efax...get it at eFax.com. The great thing about eFax is you receive faxes like e-mail, you can send them the same way.
Long time friend of Chip Anderson...I know,I know....
Increase your profits and customer satisfaction by integrating the Optical Dynamic Business Solution into your business.
Give your customers Lenses of Unsurpassed Quality
Reduce your lab bill by...
In another life, I would ask the frame/equipment/lens reps if they knew of a doctor that had a few extra days, we would also get a list of Docs from the state board and send out a letter. I don't...
Harry, I'm betting it will be less than 5 years, a lot less. When you look at the space requirments, about 20s.f. VS 200 to 500s.f. for surfacing...at the cost of real estate, that's a big savings....
Get the full story @ http://www.visionmonday.com/NewsItem.cfm?AN=6958&Cat=1
Before joining ODC I was Director of Operations for Vision Plaza In New Orleans, we were in a test with the ODC technology and dispensed about 3,000 pair of lenses, a mixture of aspheric, SV and...
Alcohol works best and is probably the safest Vs Acetone, from a health stand point, when buying from one of the Marts or Drug stores buy the 95%+. I know you can find the 99.5% at Home Depot and...
I am a Regional Sales Manager for Optical Dynamics and my view is slanted on our technology. I have been in the Optical business for 30 years...from very basic (early) labs, to superstores and now to...
Hey Chip, I believe any Lawyer worth his salt would name everyone no matter how remotely connected. Then the courts and insurance companies could hang them out to dry...Uh..determine liability.
...
Corey, I believe that Essilor owns Gentex...there should be no problem with Essilor coating Gentex product.
If you are going to drive a Gerber generator, why not buy the software that Gerber did to drive their machine? It drives the generator very well. The developer a real sharp fellow too, relatively...
I believe that Marchon will send you a trial version of Office Mate. With Vision Expo around the corner it is a good time to see all of the software. Play with the interfaces and ask if it's shipping...
It's a trial frame for doing an eye exam Dr's still use them today. It doesn't look like they have changed much.
The DMV, in Louisiana, will sell you a list or mailing labels for all drivers that have an eyeglass / contact lens restriction on their license. You will also have to sign a note that you will not...
We used the DMV and purchased a list of all eyeglass wearers within a 3-4 mile radius. You can also have the USPO verify that the addresses that you have are good, contact them and ask what format...
I saw the Chemat Technology at Vision Expo West last year.They were A/R coating in the booth and at $50,000 if I remember right, thats pretty exciting, it's about the size of a dishwasher sitting on...
Try Ultra Optics, they make a very good UV cure coating...might work. The web site is: http://www.imagewear.com/ultra.html
You can also try Ronnie Phillips at National Optical I will have to...