Send me a pm with your email.
Type: Posts; User: Wecoman; Keyword(s):
Send me a pm with your email.
Check your mail:smile:
Just disconnect the pump from the power cable. :cool:
You've got mail
From the top of my head.
You need to remove the metal cover on the top in front of the device.
Then the dials become visible. We use 3 or 4 different diameter balls to check for accuracy. But...
Actually you can:wink:
You need to get into Service menu.
Press the buttons in the exact order. CAL, CH, . (Decimal dot!)
You will see a Menu with some values and a square shape in the...
this is not an error. It is a warning. This only happens when you trace a frame or pattern smaller than 25mm of height. The CAD 3 warns you then that you need to use small chuck. The time the...
actually when you look " under the hood" you will find a Briot edger. This isa weco 550 but with a new design.
not saying this is a bad thingthough
Check your mail for the CAD 3 manual.
See above for the 450 user manual
Here you go the 450 User manual : https://www.filesanywhere.com/fs/v.aspx?v=8b69628f5f5f74b86c98
6.3 MB too big for e-mail
If the problem still exists. mail me
Buchmann Industries owns both Briot and WECO.
They are both for ale though. WECO anyway since they're like a dinasour in their development.
You will have to obtain training from the dealers/factories.
These machines operate on different systems and basic principles vary a lot.
Also check the connections to the Z transfer assy remove the flat cables and spray them with contact spray.
Move the diamond wheels (with some force) left and right untill you feel they sort of...
If you mean by template the original gages to calibrate the edger/tracer it is at best to order by original order numbers.
PM me for the original tool list.
WECO 950 is like a tank. Very dependant and reliable. had one for testing. you wouldn't belive how much abuse it can handle. For proffesional use it is almost impossible to wear down.
I grinded...
If you recevie ERRORS EE 07 from CAD or 840 on the edger youst set the tracer to the way it was
The standard setting forn the WECO Tracer is MAchinedaten this can be set to formdaten (wheeldata) either by a dip switch or through menus.
On trace2: press WECO (reset)
press CAL...
When we talk about 2D edgers we mean CNC-90, NC-90, W2D(newer model of CNC-90) 2 dimensionoal grinding
3D edgers are ZET-90, W3D(new zet-90) W430, W450 etc. 3 dimensional grinding (controlled...
There is a "bug" in the software-communication between TraceII an any 2D edger. On flat bevel you can grind perfect corners on memory stored shapes but on traced forms this looks like crap. Trace 2...
In Europe it's about 80Euro so let say around $100,-
Hi guys I've stumbled on this topic and I think I can give you some info to think about.
1. The WECO 440 is a bulletproof edger, simple and the parts used are common of the shelf parts no exotic...
It is most probaly that the turbine is worn out. You can check this by a very simple "trick". place your fingertip on the top of the drill-bit and wiggle it around. If the bit has too much clearence...
The cost of the new mainboard is about $2000,- (roughly) but then it needs to be put in the edger that is +/- 1,5 hour of work.
Then you need to restore the setting of your edger (from your...
For which groover. We have them for the Takubomatic lens Groover