5 Attachment(s)
Santinelli LEX-1000 PLB8 Edger and ICE-Mini Blocker by The Finishing Lab $22,000
TheFinishingLab.com
Refinished Santinelli Nidek LEX-1000 Edger and ICE-Mini Blocker
Warrenties, install and training is included with this system.
Refinished Santinelli Nidek LEX-1000 PLB8 Rimless Edger
NIDEK?s new LEX Lens Edger Series features the highly intuitive LEX-1000 Edger, engineered with the most advanced technology available on the market.
Its unique functions enable eyecare professionals to confidently handle even the most challenging jobs in-house to increase profits.
The World?s First Retail Edger to Make Glazing High Base Curve Lenses Simple
Features :
Minimum B measurement of 15.5mm for today?s smaller frames
Built-in fully programmable and adjustable high curve beveling
Bevel set position can be put to front, rear or any position and ratio
Can glaze up to 10 or 12 base lenses
Grooves, Safety Bevel & Polishes
Cuts all lens materials
Advanced soft grinding mode for processing super hydrophobic coats without the risk of slippage
The feature-rich LEX Series offers five different system configurations, representing the widest array of choices available in the market. The product range offers the ability to customize a system that best meets your needs based on practice size, volume, and budget.
Add on Drill ? upgrade your system to rimless glazing at any time of your choice with the retro-fit LEX Drill.
High-quality drilling ? 3D drilling from 0 to 30 degrees made easy, even challenging drilling such as twin holes, slots, rectangular holes, jewel holes or countersunk holes.
Slim design ? at only 14.5cm wide the LEX Drill can fit into the smallest of Laboratories or Workshops.
Minimum 15.5 mm ?B? dimension can be processed with the new Nano Cup/Block. You can process super hydrophobic lenses without worry about axis shift with the use of the new pliable ring adapter.
Operation
Information Bar
Even first-time users can easily operate the Lex1000 using the Information Bar which provides useful ?next-step? information.
3-D Bevel Simulation
Sophisticated 3-D bevel simulation allows you to check the placement of the bevel as if viewing the actual lens from any selected angle.
Color-coded Lens Identification
To aid the lens edging process, the display of the Lex1000 utilizes a color-coding system adapted from navigational light colors, to identify right and left lenses: green represents the right lens and red represents the left lens. Red and green cups (blocks) are included. You can avoid processing the wrong lens by following the color-prompted indicator on the display.
ICE-Mini Blocker
Blocking is easy and quick
For accurate and easy blocking for the operator, the 3-pin support lens is flexible and holds the lens from the top.
LCD Touch Panel is user-friendly.
The colour LCD touch panel is 8.4-inch and is easy to operate and offers clear display.
Networking capability is versatile
Direct connection to the 2 lens edger is easy for the ICE mini.
Blocking is as easy as 1-2-3 by the NEW ICE-Mini from NIDEK.
Step 1? On the table simply place the marked lens.
Step 2? Input all data on the LCD touch panel
The type of lens, frame, grinding mode and the data of the lens layout tat includes PD, FPD, size and height of optical center is the data to be input.
Step 3? Block with blocking arm.
Easy and accurate blocking is achieved by the operator easily with the help of flexible 3-Pin lens support and by holding the lens from the top.
This edger has been completely refinished!
95% Condition
100% Operations
Cut Counter was Reset
100% ICE-Mini Blocker
LEX1000 PDF Operational Manual and Install Manual
100% Accessory Kit
20 Pliable Cup Blocks and Pliable De-Blocker Pliars
100% Direct Water System (Included)
Santinelli Retail Price is over: $42,000
The Finishing Lab is only a broker and in no way own this machine. This machine is sold 100% AS IS. If the system is bought you understand 100% what you are buying. We in no way accept returns once the edger has shipped from the Finishing Lab.
Please email us with any questions before bidding or buying. If paying with Paypal or a credit card, a 4% charge will be added at check out. Credit cards accepted direct add 4% Other payment options are a business check and the equipment will ship once it clears and of course local pickup is always an option. |
:cool: Don't forget, the Finishing Lab is still servicing LE9000s! We will make your machine look and run like new. :cool:
