Printable View
When turning on Weco 450: gives an error
«15049 Formdaten korrupt».
Attachment 15026
if call work number 1: gives an error «15082 Database locked».
Attachment 15025
Scanner Trace II also cannot write the form to memory.
Attachment 15024
The machine may have been configured to work with an external device (eg Verifier Turbo, Conversion CL-OMA Box). Can I switch it to internal memory?
any luck fixing?
No:cry:Quote:
Originally Posted by PRECISIONLAB
Weco does require a a special network card to translate information to OMA compliant files. EE 41 means it is not communicating with edger.
If you are wanting to run as a stand alone you must set edger a "Master" and then flip internal dip switch. I don't recall which one.
where does this network card go? what does she look like?internal dip switch in the edger or tracer?Quote:
Originally Posted by PRECISIONLAB
I was given the following cables in the kit for the machine:
Attachment 15111Attachment 15112
Maybe it can be connected to a PC?
The cables pictured are RS 232 to ethernet. The large portion of the cables connect to the WECO machines. The ethernet end must have been connected to a network switch. It depends on how old the units are as older ones require a "Current Loop Card" which is installed to a PC
The dip switch is in the edger but can't recall which. I believe the number "3" changing the edger as the "Master" for stand alone use
Quote:
Originally Posted by PRECISIONLAB
What software can be used for this? Maybe there is an instruction?
Hi Seldem, do you still need help with your 450 ?
YesQuote:
Originally Posted by Fabian Corio
Ok, I can help you. PM sent.
Quote:
Originally Posted by Fabian Corio
hi Fabian - I’m having a similar issue. Are you able to pM me?
Hi Fabian, I have the same error, and I need to fix it. Please, can you help me? Thanks in advance...Quote:
Originally Posted by Fabian Corio
Hi Meld14, PM sent.
Hi Meld14, PM sent.Quote:
Originally Posted by Meld14
Hi Yonyster, yes of course. PM sent.Quote:
Originally Posted by yonyster
Sorry, I can´t find PM. Can you resend it?Quote:
Originally Posted by Fabian Corio
Thank you.
Bonjour Fabien pouvez vous m'aider moi aussi pour ce même problème ��