I'd love to get some takes on the highlighted comment. Obviously increasing the wrap angle will reduce the frame PD as measured in reference to the 0° wrap line. In other words the temporal edges of...
I used to cut this between two plano lenses just short of the bevel diameter and apply it to the flattest surface (albeit FT not applicable) also use alcohol as it evaporates nicely.
All of this is easier if you first remove the lens from the frame (ala Uilleann) and trim at 45 degrees as 24/7 suggests. You can thumb-squeege the bubbles if the frame isn't in your way,
Snap the...
I'd love to get some takes on the highlighted...
I'd love to get some takes on the highlighted comment. Obviously increasing the wrap angle will reduce the frame PD as measured in reference to the 0° wrap line. In other words the temporal edges of...
Kwill212 04-27-2024, 01:42 PM