TIPS ON DISPENSING

[Parks133]

I've heated the line with a hot air blower momentarily while pulling the frame slightly and the line stretches.

[Parks133]

For those hard to detect progressive markings, I have been using a small (3-4mm) but very bright led light and an attachable magnifier at a distance of about 4 feet. I also have used the reflection of the sun off a chrome bumper or windshield.(lab windows are tinted to 20%) That bright pinpoint lights up the laser markings quite well.

[Loki]

-0.50/+1.00@75

What is cross cylinder form the prescription given above. Plz help
Am confused 

I know its a very very late answer but cross cyl would be:
-0.50 x 165 / +0.50 x 75

[Robert Martellaro]

If you drop a trial lens on your patient's lap, it's better to ask the patient to hand it back to you.

[optical24/7]

If you drop a trial lens on your patient's lap, it's better to ask the patient to hand it back to you.

Depends on the patient…Remind me to tell you of the young lady that sat in my dispensing chair as I stood at my lab door, repeatedly telling me how hot it was in there while fluffing her skirt ala Sharon Stone in Basic Instincts without the leg crossing!…Man, l sure miss dispensing…..

[wmcdonald]

And like Paul Harvey, I can't wait to hear the rest of the story! Down on the farm!

[waynegilpin]

...Man, l sure miss dispensing…..

Oh not me.

When I retired @ 62, I had an older patient ask me why. She was in her 80's and had a great sense of humor, so I told her that I was sick of dealing with idiots and a$$holes. She immediately asked, "The Doctors or the patients?"

If they were all like her, I would have worked a few more years.

[optical24/7]

And like Paul Harvey, I can't wait to hear the rest of the story! Down on the farm!

Warren, I don’t think I can write about that here. When we’re in a bar together again, I wanna hear stories of your Velvet Teddie Bear days, performing around the country. I know you got better stories than me!

[wmcdonald]

Consider that done!

[NAICITPO]

Oh not me.

When I retired @ 62, I had an older patient ask me why. She was in her 80's and had a great sense of humor, so I told her that I was sick of dealing with idiots and a$$holes. She immediately asked, "The Doctors or the patients?"

If they were all like her, I would have worked a few more years.

:bounce:

[scatterextremely]

Regarding the process of disassembling and assembling rimless glasses with chord-mounted lenses, I've discovered a more convenient technique. Instead of opting for ribbons or fine metallic objects, I recommend using a 20# test line. This thin yet sturdy line can be inserted between the lens and the groove, facilitating the removal process by gently pulling the line from the groove.


Furthermore, it's worth noting that in the pursuit of achieving thinner lenses, some individuals may compromise the necessary thickness on each side of the groove. This insufficient thickness can lead to chipping either during handling or, more concerning, during regular use by the wearer. I recently encountered a pair that was over a year old and observed chipping issues, emphasizing the importance of maintaining an adequate thickness on both sides of the groove for the longevity and durability of the glasses.

[scatterextremely]

Today's advice is fundamental yet frequently overlooked. When assessing the alignment of eyeglass frames, the primary focus should be on ensuring straightness across the front. Even if a frame maintains a seemingly balanced 4-point stance on the wearer's face, any deviation from straightness compromises the overall fit. It's a common occurrence to encounter frames with one side appearing higher or more bent than the other, often leading patients to attribute the imbalance to differences in ear height.


In reality, these perceived differences are usually minuscule, and the claim of one ear being higher than the other is often a misconception. The key lies in a scientific examination of the frame's front alignment. Frames that appear misaligned can be a significant factor in the perceived unevenness, emphasizing the importance of a meticulous assessment for optimal comfort and visual performance.

[Robert Martellaro]

When deciding on a local lab, check the lab manager's office or home for paintings, pictures, and/or framed certificates hanging on the wall. If they're not level... said a wise optiboarder.

[Michael22]

One of the things I've noticed, and kind of discovered on my own as no other optician has ever told me to do it, but sometimes when some peoples glasses slide they also need to have an alcohol wipe taken to the nose pads to remove things like oil, make up, any sort of debris that is on the nose pads as those all cause the nose pads to slide really easily. Many a times have I had people come in for an adjustment expecting them to be heated and bent, but after checking out the fit and seeing that it's fine, i'll just clean the nose pads and it works like a charm. Never really seen that ever mentioned

[dwlk]

One of the things I've noticed, and kind of discovered on my own as no other optician has ever told me to do it, but sometimes when some peoples glasses slide they also need to have an alcohol wipe taken to the nose pads to remove things like oil, make up, any sort of debris that is on the nose pads as those all cause the nose pads to slide really easily. Many a times have I had people come in for an adjustment expecting them to be heated and bent, but after checking out the fit and seeing that it's fine, i'll just clean the nose pads and it works like a charm. Never really seen that ever mentioned

most of the silicone nosepads just wear down, or its like you say the oil/etc its such a small easy fix i feel like people 'forget' or skim over it :)