Announcement

Collapse
No announcement yet.

How to remove white stuff from plastic frames temples because of oxidation?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    How to remove white stuff from plastic frames temples because of oxidation?

    I used a lot of things to remove white stuff from plastic frames temples because of oxidation like w-40 oil, mineral oil,alcohol....etc.,but it did not help much, any one can help me I will appreciated.

    #2
    Rouge and a buffing wheel will solve your problem.

    Comment


      #3
      The "white stuff" is only dried plastic. You can use a sharp blade and scrape it off if you like......really not necessary, and the some nail polish remover, aka acetone, on a q-tip painted on will give you a shine like brand new.
      After two or three min of dry time and its ready to go out the door.

      Comment


        #4
        One of the many uses of a PD stick is for scraping the white stuff off of temples!

        Comment


          #5
          Originally posted by ANINOS View Post
          I used a lot of things to remove white stuff from plastic frames temples because of oxidation like w-40 oil, mineral oil,alcohol....etc.,but it did not help much, any one can help me I will appreciated.
          Great, thanks a lot for your advice, I will go with it and I'll hope it will work.

          Comment


            #6
            Great, thanks a lot for your advice.

            Comment

            Working...
            X