Results 1 to 24 of 24

Thread: transitions not getting dark

  1. #1
    OptiBoard Novice
    Join Date
    Feb 2002
    Location
    maryland
    Occupation
    Optical Retail
    Posts
    7

    transitions not getting dark

    I have a problem that I hope you can help.
    One of my patients recently purchased Transitions Flat top 28 plastic lenses, and she came back complaining that the lenses do not turn dark. I tested the lenses myself and the lenses will only turn to about 30% darkness even after few hours of exposure to the sun. I informed the lab of the problem and re-ordered the lenses; however the new lenses have the same problem. The patient is angry and I am not sure what to do. She had Transitions before and she knows and expects that the lenses should get much darker.

    Could anyone tell me why Transitions lenses would not turn dark?
    Would it be advisable to change the lenses to Sunsensors?

  2. #2
    Banned
    Join Date
    Jun 2000
    Location
    Only City in the World built over a Volcano
    Occupation
    Dispensing Optician
    Posts
    12,996
    What is temperature there?

  3. #3
    OptiBoard Novice
    Join Date
    Feb 2002
    Location
    maryland
    Occupation
    Optical Retail
    Posts
    7
    Quote Originally Posted by chip anderson View Post
    What is temperature there?


    High 80s

  4. #4
    Banned
    Join Date
    Jun 2000
    Location
    Only City in the World built over a Volcano
    Occupation
    Dispensing Optician
    Posts
    12,996

    You can try this

    Put lenses under a black light for 30 min. See if they work better after.
    I have a question into Jim Schaffer to see if this works, used to help Photo grays and photo browns.
    I suspect that some transitions lenses (which are created by "imbibing) the transions material either don't get soaked long enough, or the lens itself it reluctant to imbibe. Of course, transitions doesn't ever suggest this may be a problem.

    Chip:cheers:

  5. #5
    Banned Jim Stone's Avatar
    Join Date
    Jan 2003
    Location
    Point Barrow
    Occupation
    Lens Manufacturer
    Posts
    340

    Redhot Jumper

    :angry:

  6. #6
    Master OptiBoarder OptiBoard Gold Supporter Judy Canty's Avatar
    Join Date
    May 2000
    Location
    Virginia Beach, VA
    Occupation
    Dispensing Optician
    Posts
    7,482
    Are the lenses A/R coated?

  7. #7
    OptiBoard Novice
    Join Date
    Feb 2002
    Location
    maryland
    Occupation
    Optical Retail
    Posts
    7
    Quote Originally Posted by Judy Canty View Post
    Are the lenses A/R coated?
    They are not a/r coated.
    They are not poly.
    They are regular plastic.

  8. #8
    OptiWizard
    Join Date
    Jan 2002
    Location
    Palm Harbor Florida
    Occupation
    Lens Manufacturer
    Posts
    707
    Hello drpark111,

    At temps in the high 80's on non overcast days, the Transitions 1.50 Gray will darken to at least 20 to 25% Transmission. (75 to 80% tint depending on time of day, brightness of the sun). Between 11 and 2 are the brightest time of day, and UV is at its peak.

    Sometimes perception is the lens is not that dark. A quick way to demonstrate the change is to cover half of each lens with a post it note. Take them outside, activate them for a few minutes and peel off the post it. It is very dramatic to see how much the lens has changed.

    BTW, you do not have to leave a lens outside for extended periods to make it dark. After two or 3 minutes (on a normal day) the lens will darken to whatever the conditions at that time allow.
    Now, in mid winter when UV is low, extended time outside may darken the lens darker than in the intial few minutes but that is because the cold temps slow the chemical reaction. It may take 5 minutes or so to hit maximum darkness on cold, overcast winter days.

    Also, AR will not affect performance. If AR did affect the performance, you normally see a problem with the AR, it will have purple or red reflect in the normal green reflect. This is from a layer not having the proper thickness or somehow was put in out of order. It has been a while since I saw one of these.

    I hope this helps.
    Feel free to call if you have any questions.
    best regards,
    Jim
    Jim Schafer
    Retired From PPG Industries/
    Transitions Optical, Inc.

    When you win, say nothing. When you lose, say even less.
    Paul Brown

  9. #9
    OptiBoardaholic
    Join Date
    Feb 2006
    Location
    Indonesia
    Occupation
    Optical Laboratory Technician
    Posts
    250
    Quote Originally Posted by Judy Canty View Post
    Are the lenses A/R coated?
    Why did you drop this question? Will AR affect the performance?

  10. #10
    Master OptiBoarder OptiBoard Gold Supporter Judy Canty's Avatar
    Join Date
    May 2000
    Location
    Virginia Beach, VA
    Occupation
    Dispensing Optician
    Posts
    7,482
    Quote Originally Posted by Jim Schafer View Post
    Also, AR will not affect performance. If AR did affect the performance, you normally see a problem with the AR, it will have purple or red reflect in the normal green reflect. This is from a layer not having the proper thickness or somehow was put in out of order. It has been a while since I saw one of these.

    I hope this helps.
    Feel free to call if you have any questions.
    best regards,
    Jim

    Jim answered that question already, more than once.

  11. #11
    OptiBoardaholic
    Join Date
    Feb 2006
    Location
    Indonesia
    Occupation
    Optical Laboratory Technician
    Posts
    250
    Quote Originally Posted by Judy Canty View Post
    Jim answered that question already, more than once.
    Yes I had read the explanation of Jim. When you dropped the question I thought that the AR will affect the performance.

  12. #12
    Master OptiBoarder
    Join Date
    Apr 2006
    Location
    NA
    Occupation
    Dispensing Optician
    Posts
    1,255

    Blue Jumper Here's your solution:

    I know this sounds crazy, but I swear, it works.
    Put them in your freezer for 15 minutes. Take them out, put them in the sun for a few good minutes, let them get good and dark.
    Something about chlling them first activates more of the chemical in the lens, thus producing deeper tint ever after.

  13. #13
    OptiWizard
    Join Date
    Jan 2002
    Location
    Palm Harbor Florida
    Occupation
    Lens Manufacturer
    Posts
    707
    EyeFitWell,
    Cold temps slow down the chemical reaction of uv darkening a lens. By that I mean the molecule is held longer in the open (or colored) position. The millions of molecules in a photochromic lens open and close rapidly, heat and cold affect the speed of the reactions.

    Whenever more molecules are in the open position, the darker the lens, heat up the lens and more molecules will be in the closed (or clear) position, the lens will not be as dark. This is part of what we call balance of properties.

    All putting a lens in a fridge will do is cause one activation cycle to be darker than normal. It will not make the lens darker than normal in future activations and that is the urban myth that went along with placing eyewear in the fridge (or freezer)

    Jim
    Jim Schafer
    Retired From PPG Industries/
    Transitions Optical, Inc.

    When you win, say nothing. When you lose, say even less.
    Paul Brown

  14. #14
    Master OptiBoarder
    Join Date
    Apr 2006
    Location
    NA
    Occupation
    Dispensing Optician
    Posts
    1,255
    Jim-
    Really? B/C I was taught that the labs froze their transitions and then activated them. In fact, lately, customers have complained about their transitions not getting as dark, and when I told them to freeze them, they called back and said it worked.
    Is there some other way to do a first activation? Or any other suggestions about how to make their transitions get darker?
    Wow... I've been doing the freezer thing for years...

  15. #15
    OptiWizard
    Join Date
    Jan 2002
    Location
    Palm Harbor Florida
    Occupation
    Lens Manufacturer
    Posts
    707

    No Break in for non mineral photochromics

    EyeFitWell,
    Transitions and all other non glass/mineral photochromic lenses activate on their first exposure to UV light. There is no magic bullet. The performance on the first activation is as good as the UV index of the hour and day or the strength of the UV wavelength of a UV bulb if it is done in doors.

    If the lens is cold or colder than a lens at ambient temps, it will get darker, for that one performance cycle, that's it. It wont be jmped to a new dimension of performance.

    I visit many labs every year, I have yet to have a lab tell me they put Transitions in a freezer/refrigerator.

    best regards,
    Jim
    Jim Schafer
    Retired From PPG Industries/
    Transitions Optical, Inc.

    When you win, say nothing. When you lose, say even less.
    Paul Brown

  16. #16
    Master OptiBoarder OptiBoard Gold Supporter Judy Canty's Avatar
    Join Date
    May 2000
    Location
    Virginia Beach, VA
    Occupation
    Dispensing Optician
    Posts
    7,482
    Wouldn't you know that as I was leaving an account this afternoon, I overheard an optician instructing a patient via the phone to put them in the freezer for an hour and them put them in bright sunlight!

    AAAAARRRRRRGGGGGHHHHHHH!!!

  17. #17
    ATO Member OPTIDONN's Avatar
    Join Date
    Feb 2005
    Location
    Glen Ellyn, Illinois
    Occupation
    Optical Laboratory Technician
    Posts
    1,336
    Quote Originally Posted by Judy Canty View Post
    Wouldn't you know that as I was leaving an account this afternoon, I overheard an optician instructing a patient via the phone to put them in the freezer for an hour and them put them in bright sunlight!

    AAAAARRRRRRGGGGGHHHHHHH!!!
    Did this optician at least instruct the patient to take them off first!:hammer:

  18. #18
    Master OptiBoarder OptiBoard Gold Supporter Judy Canty's Avatar
    Join Date
    May 2000
    Location
    Virginia Beach, VA
    Occupation
    Dispensing Optician
    Posts
    7,482
    Yikes....I didn't stop to ask! I guess we'll just watch the local news and find out...

  19. #19
    Optimentor Diane's Avatar
    Join Date
    May 2000
    Location
    Jackson, GA - Jonesboro, GA no more
    Occupation
    Dispensing Optician
    Posts
    2,331
    Sometimes, I wonder if it's not just having the patient do something, and they believe it works since they participated in the success.

    Diane
    Anything worth doing is worth doing well.

  20. #20
    Cape Codger OptiBoard Gold Supporter hcjilson's Avatar
    Join Date
    May 2000
    Location
    Cape Cod, Hyannis, MA. USA
    Occupation
    Dispensing Optician
    Posts
    7,437
    Similar in principle, to the "cold water adjustment" to an already perfectly adjusted frame? :)
    "Always laugh when you can. It is a cheap medicine"
    Lord Byron

    Take a photo tour of Cape Cod and the Islands!
    www.capecodphotoalbum.com

  21. #21
    Bad address email on file
    Join Date
    Feb 2016
    Location
    Folsom, CA
    Occupation
    Optical Laboratory Technician
    Posts
    2
    Does anyone have any suggestion on making Glass trans lenses darker? We have already heat treated them and it has not helped. They are the thin and dark ones already as well.

  22. #22
    OptiWizard
    Join Date
    Jan 2002
    Location
    Palm Harbor Florida
    Occupation
    Lens Manufacturer
    Posts
    707
    Hi Carrie,
    Transitions Optical does not or ever produced glass photochromic lenses..Corning was the originator of glass photochromics!

    I see you heat treated the glass product, this is for improving impact capabilities. I do not recall that this treatment kicked in the silver halide technology of glass (mineral) photochromic lenses.

    Whenever I ordered glass samples from Corning, I conditioned them by exposing them to full sunlight, then reversed the reaction placing them in a dark area until they were clear. I did this several times. This conditioning did several things, mainly eliminated the yellow tinge of a spanking new blank and the lens performed closer to what a patient would experience in everyday tasks.

    I hope this helps.
    Jim Schafer
    Retired From PPG Industries/
    Transitions Optical, Inc.

    When you win, say nothing. When you lose, say even less.
    Paul Brown

  23. #23
    Master OptiBoarder
    Join Date
    Mar 2010
    Location
    north of 49
    Occupation
    Dispensing Optician
    Posts
    3,002
    Quote Originally Posted by Carrie View Post
    Does anyone have any suggestion on making Glass trans lenses darker? We have already heat treated them and it has not helped. They are the thin and dark ones already as well.
    Carrie: Welcome to Optiboard!

    Since the photochromic material is within the lens metrix, you could also opt to produce the lens with more thickness......the "thin" lens means less reactive material, so just 1mm (or whatever is tolerable) added lens thickness, will create a darker lens.
    Eyes wide open

  24. #24
    Master OptiBoarder rbaker's Avatar
    Join Date
    May 2000
    Location
    Gold Hill, OR
    Occupation
    Other Optical Manufacturer or Vendor
    Posts
    4,401
    Quote Originally Posted by Jim Schafer View Post
    I see you heat treated the glass product, this is for improving impact capabilities. I do not recall that this treatment kicked in the silver halide technology of glass (mineral) photochromic lenses.
    Originally the glass Photochromic lenses were all heat treated and later chem-tempered as it provided better results.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Bring it on dark side!
    By Mikef in forum Just Conversation
    Replies: 1
    Last Post: 05-09-2006, 05:01 PM
  2. Speed of Dark ???
    By GregG in forum General Optics and Eyecare Discussion Forum
    Replies: 63
    Last Post: 03-25-2004, 02:45 AM
  3. Dark Nose Pads
    By Cerissa in forum General Optics and Eyecare Discussion Forum
    Replies: 3
    Last Post: 10-09-2003, 08:27 PM
  4. As dark as possible
    By Rich R in forum General Optics and Eyecare Discussion Forum
    Replies: 8
    Last Post: 05-07-2003, 06:58 PM
  5. Dark Angel glasses & nautica
    By mossimo027 in forum Optical Marketplace
    Replies: 0
    Last Post: 04-11-2001, 12:03 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •