Originally Posted by
AdmiralKnight
There's basicly two ways to do it. This of course, depends a lot on what the frame is like. You can either warm up the ends of the front (where the front meets the temples) with a hot air blower, and using either a folded up towel or some wadded up paper towel, push the frame down against your worktable/bench/whatever, using the towel as a buffer, so you don't scratch it up. If you can't do that, your only other option is to add faceform. Warm the bridge up using the blower again, and bend till it's tight again. I don't like to do this, especially with the larger lenses, but sometimes it's the only option.
Bookmarks