OdTech said:
Hello i understand its old subject, but it always good to review
The case: You have mark on the OD/OS side of the bridge of the nose from the nosepads.
My way of fixing the problem:
I say to customer, to bend his head little bit , in order to evaluate if the nosepads contour/ touch the bridge or sides of the nose, if the apex or base of nosepad is cutting into the skin.
Then I adjust the nosepad by the structure of customer' nose.
Professor method:
If you have a mark on the right side of the nose from nosepads.
You either make it loose or tight on the edge of temple end(part which is covered by plastic).
My Q: Which method the most useful and correct.
Bookmarks