4.3.12 Error code 0209 (While the front surface of the lens is measured,
the feelers are positioned beyond its measurable range.) appears.
Perform the countermeasures described in “4.3.11 Error code 0208 (While the rear surface
of the lens is measured, the feelers are positioned beyond its measurable range.) appears.”.
4.3.11 Error code 0208 (While the rear surface of the lens is measured,
the feelers are positioned beyond its measurable range.) appears.
Do the feelers (40340-4100) come off?
Does the rotary encoder (40340-E043) have a
break?
Reassemble the feelers (40340-4100) properly.
(See “6.12”.)
No
No
Yes
Does the pulse motor (40340-E033) have a
break?
Replace the lens measuring ASSY (30430-
4000). (See “6.13”.)
No
Yes
Does cable CA29 (40340-CA29) have a
break?
Replace the lens measuring ASSY (30430-
4000). (See “6.13”.)
Yes
Is the wire (41002-M388) of the lens
measuring ASSY cut?
No
Replace the lens measuring ASSY (30430-
4000). (See “6.13”.)
Yes
Replace the lens measuring ASSY (30430-
4000). (See “6.13”.)
Yes
Clean the gap between the shaft of the feelers
(40340-4100) and the lug-hole of the shaft.
No
Do the feelers (4340-4100) have any defects
such as bends, etc.?
Is the symptom improved?
Replace the feelers (40340-4100). (See “6.12”.)
No
Yes
Perform the calibration of the lens measuring
ASSY (40340-4000). (See “7.3.1”.)
No
Replace the the MAIN board (40347-BA01).
(See “6.3”.)
Completion of operation
Yes
Hope this helps
Bookmarks