If I'm posting this in the wrong forum please tell me. I have an LE7070 edger that we've been using for about 6 years. In the last year or so it has developed an issue. When cutting and polishing trivex or 1.67 lenses it cuts the lens too big and it doesn't appear to resize much. It only appears to do this when polishing. This edger normally has to resize .10mm to .35mm for poly and cr-39. For 1.67 it's usually .70 to 1.2mm. I just did a trivex and checked it with calipers. Even set on 1.3mm it hadn't cut the lens any smaller than it did for the original cut.
Any ideas?
Thanks!
Bookmarks