some few month, we have a random problem with the coating. We have a small ring on the few lens. It's not a classic "point" with a particule on the center but a distortion varnish. We have this problem on CR39, Rx or Stock lenses, 1.6 and 1.67... I use a same varnish for all material
Sometime front or back
We have changed the pipe DI Water, try to changed the power and time IR in the machin... We see the problem at the machin outlet before the finally oven.
We have same problem with 2 tank varnish, same if the varnish is new.
This defect disappears when I remove the lacquer so it's not in the material.
I have try with a new Mix + Méthanol . I have a old Mix alcool (2015) but same problem with the mix product 2016...
I feel that we are putting lot of Mix+Methanol for to compensated the evaporation but the tank Mix+Methanol is not hermetic
Varnish have 1 month and 10° in the tank
I don't see a bubble in the varnish.
Next month, I will try with my other tank. This tank have clean with detergent , normaly I clean the tank and pipe with the flow Méthanol many time.
I take all idea
I up this post... If Does anyone have a fisa program/recipe for to compare? We have not a stiring SCL.
Do you use US in the city water? Because on my City water tank , we have some bubble with US (water degasing)..
What cleaning process are you using before dip coating? How do you remove the surfacing tape? For me it looks like residue of glue not properly removed. You not see it with naked eye. You have on the missing places another surface tension.
Try Olschner Optimal 22.0 in seperate US Tank put you lenses there for 2-3 minutes, rinse them properly and after this go with the basket in NaoH and make your process.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By jland in forum General Optics and Eyecare Discussion Forum
Last Post: 09-27-2016, 06:59 AM
By brandon76 in forum General Optics and Eyecare Discussion Forum
Last Post: 09-27-2016, 04:55 AM
By TALTOSZ in forum General Optics and Eyecare Discussion Forum
Last Post: 08-26-2014, 01:09 AM
By essegn in forum Ophthalmic Optics
Last Post: 02-03-2014, 09:23 AM
By nixg in forum General Optics and Eyecare Discussion Forum
Last Post: 10-17-2005, 09:06 AM
OptiBoard is proudly sponsored by: