Results 1 to 1 of 1

Thread: Final Inspector-Southern Optical, Greensboro, NC - Three openings available!

  1. #1
    Bad address email on file
    Join Date
    Jul 2009
    Location
    Dallas, TX
    Occupation
    Lens Manufacturer
    Posts
    86

    Final Inspector-Southern Optical, Greensboro, NC - Three openings available!

    Essilor of America, Inc. (Essilor), is the leading manufacturer and wholesaler of prescription lenses in the United States.


    We currently have a Final Inspector career opportunity at Southern Optical in Greensboro, NC. There are three open positions available. Optical experience is required.



    Position Summary: The primary focus of this position is to inspect lenses and frames to ensure that they are optically and cosmetically accurate. Duties in this position are usually repetitive, requiring analysis and use of individual judgment. Specific duties for this position include performing a cosmetic inspection of the lens and using the lensometer to check for power, prism, axis, frame alignment, PD’s, seg height and lens fit. Supervision ranges from close to general.
    Essential Duties: Percentage of Time
    All duties to be performed according to the established standard and in compliance with all company policies and procedures while maintaining regular, prompt attendance and availability for overtime as needed:
    • Utilize manual or automatic lensometer to check power, prism, axis, frame alignment, PD’s, seg height, and lens fit. 20%
    • Read the work ticket to verify prescription instructions such as tints, UV, coatings, and progressive adds. 50%
    • Wash or wipe lenses if necessary and perform cosmetic inspection. 10%
    • Utilize marker to put all appropriate markings on lenses. 10%
    • Bag lenses or insert framed work into cases. Put all necessary enclosures in envelope or pouch. 10%
    Other Duties:
    • Perform other duties within the finishing department or other areas as assigned.
    • Maintain a clean and organized work environment.
    • Observe all company policies, rules, and safety practices.
    Physical Demands: The tasks of this position generally requires duties to be performed by:
    • Frequently lift and move up to 20 lbs to waist height unaccompanied.
    • Regularly sit for duration of shift.
    • Occasionally required to walk, stand, stoop, climb, or balance.
    • Coordinated use of hands and fingers to grasp, feel objects, transfer small items from one hand to another, fine manipulation, and bilateral reach with arms.
    • Use of close vision, color vision, depth perception and ability to adjust focus.
    Work Environment: • Fast paced, production environment.
    • Regularly work with others.
    • The noise level in the laboratory is generally moderate.
    • Regularly required to work with or around chemicals.
    Safety and Ergonomic Requirements: • Must practice safe work practices at all times and report any unsafe conditions immediately.
    • Required to wear the appropriate PPE while in the laboratory, including but not limited to safety eyewear and enclosed shoes.
    • Attend and participate in all required safety trainings.
    • Follow all Lock Out/Tag Out procedures as required for both authorized and affected users.
    • Participate in daily ergonomic stretches and follow all ergonomic requirements of the position.
    • Follow all personal dress requirements according to the established dress code and safety requirements.




    Qualification Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.




    Education/Experience
    • High School education or equivalent preferred.
    • 5-7 years previous related experience and/or training helpful.
    OPTICAL EXPERIENCE REQUIRED
    Language Ability
    • Ability to read and comprehend simple instructions, short correspondence, and memos.
    • Ability to write short correspondence.
    • Ability to communicate effectively in a team environment.
    Math Ability
    • Basic ability to add, subtract and use fractions.
    • Understand decimal numerical sequencing.
    Reasoning Ability
    • Ability to multi-task and prioritize.
    • Demonstrate good judgment and decision making skills.
    Computer Skills
    • No skills needed.
    Certificates and Licenses
    • None required.




    If you are interested in applying for this position please send your resume to: Michael Murphy, Regional Strategic Implementation Manager, Email: mmurphy@essilorusa.com
    Last edited by Christina Cady; 05-28-2015 at 03:41 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Optical Inspector needed in Syracuse, NY
    By sniedens in forum The Job Board
    Replies: 0
    Last Post: 06-03-2014, 10:05 AM
  2. optical lab openings
    By Jim in forum The Job Board
    Replies: 9
    Last Post: 04-18-2011, 02:07 PM
  3. Optical Lab Final Inspection
    By dexter in forum The Job Board
    Replies: 0
    Last Post: 08-05-2010, 03:19 PM
  4. Need an optical in Greensboro, NC
    By obxeyeguy in forum General Optics and Eyecare Discussion Forum
    Replies: 4
    Last Post: 03-25-2010, 08:41 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •