We buy your used optical lab equipment

[opticmachine]

Used in good condition generators lens polishers, lens edgers please send your list to marmore@opticalmachinery.com or call 954-662-2839.
Thanks,

[rswhite]

hi. I have a ait grand mark . very old but runs, rw discntopt@Hotmail.com

[technikeye]

Hey I have the old weco edger still in working condition, if you intresting send me a pm @ technikeye@yahoo.com

[Scott Emery]

i have a gerber coburn edger and blocker. if your interested email me....semery25@me.com
its a kappa in perfect condition! its from 2001 but hasnt been used in 5 years since the store closed.

[Agiuda]

hi I have a great working Santinelli 7070sx . if interested email me at agiuda@aol.com or text me at 954-668-4312

[leestaniforth]

Hi,

I have a single vision A+R auto blocker for sale. sold as seen. Would this be something of interest?

[braheem24]

I have a

Coburn Step One block

Santinelli 7070 Edger

Ultra Optics MR3 Coater

2 Topcon ACP-8 Projectors

[Manny Seh]

I have lots to sell, are you still interested please call me at 905-450-0763
i have topcon patteren less edger, blocker, reclaim tank.
thank you

[Fred Simmons]

I would like to sell the following: 1. Edger-Gerber Coburn-KAPPA Model # M10185 Serial # 044235. 2. Tracer-Gerber Coburn-KAPPA Model #10003 Serial # 044237. Both are in very good condition and I have all the original auxiliary items that came with them (like bar code scanners etc.). Please call 806-282-8286 or email fsimmons@cableone.net. Photos available.Located near Amarillo, Texas.

[wbvci]

I have a used Essilor Kappa Gerber Coburn edger I bought back in January and a tracer Gerber Coburn that I also bought. I have not used them yet and my practice is going to be closing in the next few months so I would like to sell them and start clearing up space. You can send me a private message here if you are interested. As far as I know, they work, but I believe the edger did not come with a piece for doing rimless drill mounts

[wibblequikit]

Hi Scott,
Do you still have the Kappa tracer/blocker? Would you consider selling it seperately?
Thanks, Michael

[wbvci]

Hi Scott,
Do you still have the Kappa tracer/blocker? Would you consider selling it seperately?
Thanks, Michael

I've got a Gerber Coburn Traver and a Gerber Coburn edger I'm looking to sell while I'm in the process of closing my office over the next few months. What were you looking to pay for one?

[wibblequikit]

Scott,
is it either a Kappa or Gamma tracer? I have a Kappa N95 edger that will only work with a Kappa or Gamma tracer blocker. Do you have a pic?
Thanks, Michael

[wbvci]

Scott,
is it either a Kappa or Gamma tracer? I have a Kappa N95 edger that will only work with a Kappa or Gamma tracer blocker. Do you have a pic?
Thanks, Michael

Mine is a Gerber Coburn Triumph. It looks like the Essilor Kappa but it is not the same manufacturer. I also have an edger that is Gerber Coburn triumph that I bought off Ebay. I don't know if it works since I don't know how to use it, but if you make me a decent offer for both, I will sell them as a package to you.

[wibblequikit]

I have a triumph tracer that won't connect serially to my kappa edger. It's have to be a heck of a deal for me to buy anothe tracer and edger that I don't know works. I did just purchase a Briot Accura CX that works beautifully so I'm not up against it. That said, make me am offer I can't refuse...

[wbvci]

Both for 1400 total, plus whatever dead cost is on shipping.