AHHH, Need schematics on SERVO BOARD for Coburn SGX generator--HELP!

[Miles DiCaro]

Can someone possibly help me find the schematics for the Servo Board layout for a Coburn SGX surface generator? Trying to troubleshoot a fuse problem, and believe its the board that is creating the surge.

If somebody....ANYBODY, could help it would be much appreciated.

Thanks

[HarryChiling]

Can someone possibly help me find the schematics for the Servo Board layout for a Coburn SGX surface generator? Trying to troubleshoot a fuse problem, and believe its the board that is creating the surge.

If somebody....ANYBODY, could help it would be much appreciated.

Thanks

If you get a picture of it, I might be able to walk you through the components.

Take a look at the board you may find all you need on the actual boards screen printing.

[Miles DiCaro]

I finally got the SGX to work. I think the main problems were the spindle speed sensor as well as the solid state relay. I didn't change the boards but did change out some of the channels on the servo board.

Would it be alright to get into contact with you if I run into any other problems in the future?

Thanks Harry

[leestaniforth]

I USED TO WORK FOR GERBER COBURN AS A FIELD SERVICE ENGINEER SO IF YOU NEED HELP LET ME KNOW.

CHEERS
lEE