Where's a good place to get an inexpensive coutner-top polishing unit? And possibly a small manual grovver as well.
Where's a good place to get an inexpensive coutner-top polishing unit? And possibly a small manual grovver as well.
I have a Vigor single spindle polisher $150 Delivered.
What kind of polisher?? What are you polishing??
These folks can help you out with a manual groover.
Set-up on a new groover is tricky and results are OK but with some time and fiddling you can usually get them to work.
If you find a lightweight single spindle polisher GRAB IT!
It seems that everything out there is based on a dual spindle industrial motor.
http://www.jaoptronics.com/
We just use a cheap bench grinder from Lowe's and replace the stone with a polish wheel for when we need it, although it's not very often since our edger polishes jobs.
-Steve
They are even cheaper at Harbor Freight.
Chip
I dont see why a single spindle motor, a double spindle one probably is cheaper and can do 2 functions at the same time. I would purchase locally, much less expensive. Like Chip says.
I have an old Coburn polishing unit I'll sell you cheap. It's pretty large for a polisher though, about 13 inches square.
DragonlensmanWV N.A.O.L.
"There is nothing patriotic about hating your government or pretending you can hate your government but love your country."
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks