Looking for a Lab that can make a 20mm lens

[Jalane]

Our optical shop is looking for a lab that can make a +13.50 20mm round lens with AR. None of our supply labs are able to do this. It is a lens for an inspection loupe and can only be 2mm thick. Any help would be greatly appreciated.

[braheem24]

Get a +13.00 or +14.00 from a trial lens set, add A.R.

Full aperature is 35mm in diameter and over 2.0mm, I would try a non-full aperature which should be 20-25mm and handstone any excess.

PS, Your lab has to do nothing more then surface the lens down to a 23mm diameter and clean the bevel on the handstone, edging is not required.

Good Luck

EDIT: Even Cr-39 will get you there.

[glazinggeek]

PS, Your lab has to do nothing more then surface the lens down to a 23mm diameter and clean the bevel on the handstone, edging is not required.
most labs only do a 50mm small lens as this is the size of buttons and chuck size

[Jacqui]

The only way I can think of is to take it down as far as possible on the generator and then finish the job on a sphere polisher. It would probably need to be a glass lens for this to work though.

[DragonLensmanWV]

There are commercial optical labs that produce such lenses for microscopes, binoculars, etc that could do that.

[rbaker]

Our optical shop is looking for a lab that can make a +13.50 20mm round lens with AR. None of our supply labs are able to do this. It is a lens for an inspection loupe and can only be 2mm thick. Any help would be greatly appreciated.

http://www.unitedlens.com/

[Fezz]

http://www.unitedlens.com/

Cool link!

[DragonLensmanWV]

http://scientificsonline.com/category.asp_Q_c_E_424411


Edmund's might have a similar lens.

[rbaker]

Cool link!

Cool guys. A lot of American Optical old-timers as they are just a few clicks up the road.

[Jacqui]

Cool guys. A lot of American Optical old-timers as they are just a few clicks up the road.

As an old time AO person, I was wondering if it was some of them.

[Chris Ryser]

Everything in lenses and prisms is available at:

Getting Optics is Easier than Ever

From our website you can find free information, shop our catalog of over 16,900 products, view in stock status of our items or request a FREE Edmund Optics print catalog. You can also shop using our interactive digital catalog which is an exact replica of our print catalog with enhanced searching and linking capabilities. With our 99.9% same day order fulfillment rate you can rest assured that the items you need will be in stock and ready to ship. Most orders arrive within 2-5 working days. Need your optical components by Monday Morning? Simply order by 12:45 ET on Saturday and request overnight shipping (US customers only). Customer Service reps are available on Saturday from 10am-1pm ET.


http://www.edmundoptics.com/

[Pvtcjhalo]

The trial lens idea is wonderful! We have used Bristow in Tuscon for lenses with very small B's. I still don't get what the prob is. When I worked in an edging lab I would modify blockers all the time, and hand bevel. The labs you use seem lazy!